This model is discontinued
AirTAC has phased out the MSAL series. You can still order this code here: we ship the direct replacement MSBL25X60SCA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø25mm bore and 60mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the direct replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA.
- BoreØ25 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA
The AirTAC MSAL25X60SCA is a discontinued single-acting push cylinder with a 60mm stroke. Air extends the rod to do work, while an internal spring retracts it for a fail-safe home when air is removed. The direct replacement is the MSBL25X60SCA, matching the bore, stroke, and G1/8 port. This 25mm bore generates 176.4 N of usable push force at 0.5 MPa (274.5 N at 0.7 MPa).
This SKU features a -S magnet for position sensing. The legacy MSAL uses older CS1-M / DS1-M reed switches, whereas the MSBL upgrade accepts CMSG / DMSG / EMSG solid-state sensors. The MSAL has threaded covers, while the MSBL uses a riveted rolling-packed body. This unit has a CA back cover (pivot clevis) for arcing loads, a fixed rubber bumper, and a PT tapered port thread.
Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA carries the same single-acting ratings.
Usable Push Force (Ø25mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 176.4 N |
| 0.7 MPa | 274.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA Is Used
Circuit Board Ejector
Pushes a freshly soldered PCB out of a wave soldering fixture using 176.4 N at 0.5 MPa; the spring return safely retracts the pin so the conveyor can advance.
Packaging Flap Folder
Extends to tuck a carton flap on a rotary packaging line, relying on the CA pivot clevis to absorb the slight arc of the moving web during the 60mm stroke.
Textile Loom Guide
Acts as a fail-safe thread guide that drops into position when pressurized and springs back to its retracted home on air loss, preventing yarn snags during loom stoppages.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA
To replace this MSAL25X60SCA, install the MSBL25X60SCA. Confirm the 25mm bore, 60mm stroke, G1/8 PT port, M10x1.25 rod thread, and CA pivot cover are retained. Note the sensor family change from CS1-M/DS1-M to CMSG/DMSG/EMSG. Minimum operating pressure is 0.2 MPa to overcome the spring. Never apply an external load on the return stroke.
If sizing for a different output, step down to the 20mm bore (106.8 N push at 0.5 MPa) for lighter ejects, or step up to the 32mm bore (317.7 N at 0.5 MPa) for heavier pressing. At a 60mm stroke on these small bores, ensure the rod-end alignment prevents side-load bending.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA FAQ
Yes, the MSAL25X60SCA is discontinued. The direct replacement is the MSBL25X60SCA, which matches the 25mm bore, 60mm stroke, CA pivot cover, and G1/8 port. You will only need to update your sensors from the older CS1-M / DS1-M switches to the CMSG / DMSG / EMSG family.
This single-acting push cylinder delivers a usable force of 176.4 N at 0.5 MPa and 274.5 N at 0.7 MPa (max 27.9 kgf). The minimum operating pressure is 0.2 MPa because the air must overcome the internal return spring to extend the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA replaces this model 1:1.
Fast Dispatch
MSBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL25X60SCA → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA)
Tell us the quantity and destination — we quote the direct AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X60SCA replacement with price, stock and lead time, usually within 7-8 hours.