This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 100mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM
The AirTAC MSAL32X100CM is a discontinued 32mm bore, 100mm stroke single-acting push cylinder with a spring return. Air extends the rod for the work stroke, while an internal spring retracts it, providing a fail-safe retracted home on air loss. It yields a usable push force of 317.7 N at 0.5 MPa (478.5 N at 0.7 MPa). The exact drop-in replacement is the MSBL32X100CM, matching the bore, stroke, CM round-end back cover, and G1/8 port.
This non-magnet SKU lacks a -S code and cannot accept a position sensor. The older MSAL uses threaded covers and PT port threads, whereas the MSBL upgrade features a riveted rolling-packed body. A fixed rubber bumper absorbs end-of-stroke impact, as there is no adjustable cushion. Apply no external load on the spring return stroke, and note that the spring cannot hold a mid-stroke load without an external device.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM Is Used
Stamping Press Ejector
Ejects small stamped metal brackets from a die using 317.7 N of push force at 0.5 MPa, relying on the spring return to clear the die during air loss.
Packaging Carton Flap Folder
Folds corrugated carton flaps on a packaging line; the fail-safe retracted home ensures the folder stays clear when the conveyor stops.
Woodworking Router Clamp
Holds pine panels against a router fence with 478.5 N of force at 0.7 MPa, releasing instantly when the 3/2 valve exhausts the air.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM
To replace this MSAL32X100CM, install the MSBL32X100CM drop-in, confirming the 32mm bore, 100mm stroke, G1/8 port, PT threads, and CM round-end back cover. Because this is a non-magnet SKU, you lose position sensing entirely; if you need sensors, step up to an MSBL32X100SCM and use CMSG/DMSG/EMSG switches instead of the legacy CS1-M/DS1-M. Maintain a 0.2 MPa minimum working pressure to overcome the return spring.
For sizing flexibility, stepping down to a 25mm bore drops the 0.5 MPa push force to 176.4 N, while stepping up to a 40mm bore increases it to 539.9 N. With a 100mm stroke on a 32mm bore, minimize side loads to prevent rod-bending and premature seal wear.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM FAQ
Yes, the MSAL32X100CM is discontinued. The exact drop-in replacement is the MSBL32X100CM, which matches the 32mm bore, 100mm stroke, CM round-end back cover, and G1/8 port. The MSBL upgrades the body to a riveted rolling-packed design.
The usable push force is 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa. The minimum operating pressure is 0.2 MPa because the incoming air must overcome the internal return spring to extend the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100CM → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100CM replacement with price, stock and lead time, usually within 7-8 hours.