This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 100mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB
The AirTAC MSAL32X100SCASDB is a discontinued single-acting push, spring-return mini cylinder. Air extends the rod for the work stroke, while an internal spring retracts it to a fail-safe home when air is released. It delivers a usable push force of 317.7 N at 0.5 MPa (478.5 N at 0.7 MPa). The exact drop-in replacement is the MSBL32X100SCASDB, matching the 32mm bore, 100mm stroke, G1/8 port, and SDB mounting.
This SKU features a -S magnet for position sensing. On the MSAL it uses the older CS1-M / DS1-M switches; the MSBL replacement uses CMSG / DMSG / EMSG sensors. The MSAL has threaded covers, whereas the MSBL features a riveted rolling-packed body. The CA back cover is a pivot clevis that swings on a pin, pairing with the SDB bracket to accommodate arcing loads. A fixed rubber bumper absorbs end-of-stroke impact, as no adjustable cushion is provided.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB Is Used
Circuit Board Ejection
Pushes finished PCBs out of an SMT testing fixture with 317.7 N at 0.5 MPa; the spring return safely retracts the ejector pin when air is cut.
Pivoting Parts Diverter
Uses the CA clevis and SDB bracket to swing a guide flap on a packaging conveyor, relying on the fail-safe home to clear the lane on air loss.
Sheet Metal Clamping
Extends 100mm to hold an aluminum panel during a riveting process, with the fixed rubber bumper absorbing the repeated impact forces.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB
To replace this MSAL with the MSBL32X100SCASDB, confirm the 32mm bore, 100mm stroke, PT G1/8 port, M10x1.25 rod thread, CA clevis, and SDB bracket. Swap the CS1-M / DS1-M sensors for CMSG / DMSG / EMSG equivalents. Maintain a minimum 0.2 MPa operating pressure to overcome the return spring, and apply no external load on the return stroke.
If sizing up or down, the 25mm bore neighbor provides 176.4 N at 0.5 MPa, while the 40mm bore neighbor provides 539.9 N at 0.5 MPa. For this 100mm stroke on a small 32mm bore, ensure rigid guidance to prevent side-load and rod-bending issues.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB FAQ
Yes, the MSAL32X100SCASDB is discontinued. The exact drop-in replacement is the MSBL32X100SCASDB, matching the 32mm bore, 100mm stroke, G1/8 port, CA back cover, and SDB mounting. You must upgrade your position sensors from the older CS1-M / DS1-M to the CMSG / DMSG / EMSG family.
The usable push force, already net of the return spring, is 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa. The operating pressure range is 0.2-1.0 MPa, with a 0.2 MPa minimum required for air to overcome the internal spring. The maximum equivalent push force is approximately 48.8 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X100SCASDB → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X100SCASDB replacement with price, stock and lead time, usually within 7-8 hours.