This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 10mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM
The AirTAC MSAL32X10CM is a discontinued single-acting push, spring-return mini cylinder. Air extends the 12mm rod for the 10mm stroke, while an internal spring retracts it to a fail-safe home on air loss. It delivers 317.7 N of usable push force at 0.5 MPa and 478.5 N at 0.7 MPa. The exact drop-in replacement is the MSBL32X10CM, matching the 32mm bore, 10mm stroke, G1/8 port, and CM round-end cover.
This SKU lacks the -S magnet option and cannot accept a position sensor. As an upgrade fact, the MSAL uses threaded covers and older CS1-M/DS1-M switches, while the MSBL replacement features a riveted rolling-packed body and CMSG/DMSG/EMSG sensors. End-of-stroke energy is absorbed by a fixed rubber bumper, not an adjustable cushion.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×10 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM Is Used
PCB Reject Gate
Uses the 317.7N push at 0.5MPa to flick populated PCBs off a test conveyor. The spring return ensures the gate retracts clear of the line during air loss.
Stamping Pin Ejector
Punches a 10mm stroke to push stamped metal blanks from a die cavity. The fail-safe home prevents the pin from jamming the press on air pressure drop.
Bottle Diverter Arm
Extends a deflector plate to route plastic bottles between labeling lanes. The fixed rubber bumper absorbs the hard 10mm end-stop without adjustment.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM
To replace this MSAL32X10CM with the MSBL32X10CM, verify the 32mm bore, 10mm stroke, G1/8 PT port, and CM round-end cover. Because this SKU has no -S magnet, it cannot take a sensor; if you need position detection, specify an -S MSBL to use CMSG/DMSG/EMSG switches. Remember the 0.2 MPa minimum operating pressure and apply no external load on the spring return stroke.
For sizing flexibility, stepping down to the 25mm bore yields 176.4 N at 0.5 MPa, while stepping up to the 40mm bore provides 539.9 N at 0.5 MPa with its larger G1/4 port. At a short 10mm stroke on a 32mm bore, side-load risks are minimal, but always ensure rigid rod-end alignment to prevent guide wear.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM FAQ
Yes, the MSAL32X10CM is discontinued. The exact drop-in replacement is the MSBL32X10CM, which matches the 32mm bore, 10mm stroke, CM cover, G1/8 port, and 317.7N push force. The MSBL upgrades the body to a riveted rolling-packed design.
The usable push force is 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa (roughly 48.8 kgf max). The minimum operating pressure is 0.2 MPa because the air must overcome the internal return spring to extend the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X10CM → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X10CM replacement with price, stock and lead time, usually within 7-8 hours.