This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 25mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA
The AirTAC MSAL32X25CA is a discontinued single-acting push, spring-return mini cylinder. Air extends the 12mm rod for a 25mm stroke, while an internal spring retracts it to a fail-safe home when air is removed. It delivers 317.7 N of usable push force at 0.5 MPa. The exact drop-in replacement is the MSBL32X25CA, sharing the same 32mm bore, CA pivot cover, and G1/8 port.
This SKU features a CA clevis back cover that swings on a pin to absorb arcing loads. Because it lacks the -S suffix, it cannot accept a position sensor. Upgrading to the MSBL swaps the older threaded covers for a riveted rolling-packed body. The MSAL uses fixed rubber bumpers, meaning there is no adjustable cushioning on the extend stroke.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×25 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA Is Used
Stamping Press Ejection
Pushes formed sheet metal parts out of a stamping die using 317.7 N at 0.5 MPa. The spring return guarantees the ejector pin clears the die if air pressure drops.
Pivoting Arc Gate
Swings a parts-diverter gate on a packaging conveyor. The CA clevis back cover accommodates the arcing motion without binding the 12mm rod.
CNC Fixture Clamping
Extends to lock an aluminum housing in a CNC machining center. The fail-safe retracted home ensures the clamp opens automatically during an air loss event.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA
To replace this MSAL32X25CA, install the MSBL32X25CA. Confirm the 32mm bore, 25mm stroke, G1/8 PT port, M10x1.25 rod thread, and CA pivot back cover. Remember the 0.2 MPa minimum pressure required to overcome the return spring, and apply no external load on the spring return stroke. If sizing a new machine, step down to a 25mm bore for 176.4 N at 0.5 MPa, or step up to a 40mm bore for 539.9 N at 0.5 MPa. At this 25mm stroke, side-load risks are minimal, but always verify rod alignment.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA FAQ
Yes, the MSAL32X25CA is discontinued. The exact drop-in replacement is the MSBL32X25CA, which matches the 32mm bore, 25mm stroke, CA pivot cover, and G1/8 port. The MSBL upgrades the body to a riveted rolling-packed design but retains the same force class.
The usable push force is 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa (approximately 48.8 kgf). It requires a minimum operating pressure of 0.2 MPa to overcome the internal return spring. Because this SKU lacks the -S magnet, it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25CA → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25CA replacement with price, stock and lead time, usually within 7-8 hours.