This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 25mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM
The AirTAC MSAL32X25SCM is a discontinued single-acting push cylinder with a 25mm stroke and spring return. Air extends the rod for the work stroke, while an internal spring retracts it, providing a fail-safe retracted home on air loss. It delivers a usable push force of 317.7 N at 0.5 MPa. The exact drop-in replacement is the MSBL32X25SCM, matching the 32mm bore, 25mm stroke, G1/8 port, and CM mounting.
This SKU includes the -S magnet, which pairs with the older CS1-M and DS1-M reed switches. The modern MSBL replacement upgrades this to CMSG, DMSG, or EMSG sensors. The original MSAL uses threaded covers, whereas the MSBL features a riveted rolling-packed body. A fixed rubber bumper absorbs end-of-stroke impact, as no adjustable cushion is present in this single-acting design. Apply no external load on the spring return stroke to prevent rod damage.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×25 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM Is Used
PCB Ejector Pins
Pushes finished printed circuit boards out of an assembly fixture with 317.7 N at 0.5 MPa, relying on the spring return to clear the ejector path during a downstream pause.
Stamping Press Ejector
Ejects small stamped metal parts from a die cavity. The fail-safe retracted home ensures the pin clears the tool when machine air is dropped for die changes.
Packaging Flap Diverter
Extends to deflect carton flaps on a packaging line. The single-acting push action simplifies plumbing to one 3/2 valve, while the fixed rubber bumper handles the rapid stroke end impact.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM
To replace this MSAL32X25SCM with the MSBL32X25SCM, verify the 32mm bore, 25mm stroke, PT thread, CM round-end back cover, and mounting. The -S magnet means you must update your sensors from the legacy CS1-M/DS1-M to the CMSG/DMSG/EMSG family. Ensure your air supply meets the 0.2 MPa minimum to overcome the return spring. If sizing down, the 25mm bore provides 176.4 N at 0.5 MPa; if stepping up, the 40mm bore offers 539.9 N at 0.5 MPa. At this 25mm stroke, side-load and rod-bending risks are minimal, but always maintain correct alignment. The fixed rubber bumper requires no adjustment, unlike the adjustable cushions found on double-acting variants.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM FAQ
Yes, the MSAL32X25SCM is discontinued. The exact drop-in replacement is the MSBL32X25SCM, matching the 32mm bore, 25mm stroke, G1/8 port, and CM cover. You must update your sensors from the old CS1-M/DS1-M to the CMSG/DMSG/EMSG family.
The usable push force is 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa. The minimum operating pressure is 0.2 MPa because the air pressure must overcome the internal return spring to extend the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X25SCM → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X25SCM replacement with price, stock and lead time, usually within 7-8 hours.