This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 30mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA
The AirTAC MSAL32X30SCA is a discontinued single-acting push cylinder with a 32 mm bore and 30 mm stroke. Air extends the rod for the work stroke, while an internal spring retracts it, providing a fail-safe retracted home on air loss. It delivers 317.7 N of usable push force at 0.5 MPa. The exact drop-in replacement is the MSBL32X30SCA, matching the bore, stroke, G1/8 port, and CA clevis.
This SKU includes the -S magnet for position sensing, which uses the older CS1-M / DS1-M switches; the MSBL successor upgrades to CMSG / DMSG / EMSG sensors. The MSAL features threaded covers and a fixed rubber bumper, whereas the MSBL uses a riveted rolling-packed body. Minimum operating pressure is 0.2 MPa to overcome the return spring, and applying external loads on the spring return stroke must be avoided.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×30 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA Is Used
PCB Router Ejector
Uses the 317.7 N push force at 0.5 MPa to eject cut printed circuit boards from a routing machine, with the spring ensuring the arm clears the work area on air loss.
Stamping Press Locator
Pushes a locator pin into a sheet metal blank before stamping; the CA clevis accommodates minor arc swings, and the fixed rubber bumper absorbs the end-of-stroke impact.
Textile Loom Guide
Shifts a yarn guide into position during weaving; the fail-safe spring return pulls the guide back to a safe home if the loom's air supply drops.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA
To replace the MSAL32X30SCA, install the drop-in MSBL32X30SCA. Confirm the 32 mm bore, 30 mm stroke, G1/8 PT port, M10x1.25 rod end, CA pivot clevis, and -S magnet. Remember the sensor family changes from CS1-M / DS1-M to CMSG / DMSG / EMSG. Ensure your air supply beats the 0.2 MPa minimum, and never apply external load to the return stroke. If sizing down, the 25 mm bore offers 176.4 N at 0.5 MPa; if stepping up, the 40 mm bore provides 539.9 N at 0.5 MPa. At 30 mm stroke, side-load rod-bending risks are low, but maintain straight alignment.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA FAQ
Yes, the MSAL32X30SCA is discontinued. The exact drop-in replacement is the MSBL32X30SCA, matching the 32 mm bore, 30 mm stroke, G1/8 port, CA clevis, and magnet. You will need to upgrade your sensors from CS1-M / DS1-M to CMSG / DMSG / EMSG switches.
The usable push force is 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa (roughly 32.4 kgf and 48.8 kgf). The operating pressure range is 0.2-1.0 MPa; the 0.2 MPa minimum is required because air must overcome the internal return spring to extend the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X30SCA → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X30SCA replacement with price, stock and lead time, usually within 7-8 hours.