This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 40mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA.
- BoreØ32 mm
- Stroke40 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA
The AirTAC MSAL32X40CA is a discontinued single-acting push, spring-return mini cylinder. Air extends the rod for the work stroke, and an internal spring retracts it to a fail-safe home when air is removed. This 32 mm bore provides a usable push force of 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa. The exact drop-in replacement is the MSBL32X40CA, which matches the bore, stroke, G1/8 port, and CA clevis.
This SKU features a CA pivot back cover that swings on a pin to accommodate arcing loads. Because it lacks the -S suffix, this specific cylinder cannot accept a position sensor. As an upgrade path, the MSBL replacement features a riveted rolling-packed body instead of the older MSAL threaded covers, and it uses modern CMSG, DMSG, or EMSG switches if a magnet is added later.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×40 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA Is Used
Circuit Board Ejector
Pushes finished PCBs out of a wave soldering carrier with 317.7 N at 0.5 MPa, relying on the spring return to retract the pin before the next cycle.
Pneumatic Press Insert
Drives small bushings into die-cast housings, where the CA clevis accommodates slight mechanical misalignment and the fixed rubber bumper absorbs the stroke impact.
Diverter Gate Actuator
Extends a sorting flap on a packaging conveyor; if compressed air is lost, the spring fail-safe retracts the flap to a defined home position to prevent line jams.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA
To replace the MSAL32X40CA, specify the MSBL32X40CA to retain the 32 mm bore, 40 mm stroke, PT G1/8 port, M10x1.25 rod-end thread, and CA clevis. Remember the minimum operating pressure is 0.2 MPa to overcome the return spring. Never apply an external load on the spring return stroke. If you need less force, step down to the 25 mm bore, which yields 176.4 N at 0.5 MPa. If you need more force, step up to the 40 mm bore, which provides 539.9 N at 0.5 MPa and uses a larger G1/4 port.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA FAQ
Yes, the MSAL32X40CA is discontinued. The exact drop-in replacement is the MSBL32X40CA, which matches the 32 mm bore, 40 mm stroke, CA clevis, and G1/8 port. The MSBL uses a riveted body instead of threaded covers.
The MSAL32X40CA provides a usable push force of 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa. The minimum operating pressure is 0.2 MPa because the air pressure must overcome the internal return spring to extend the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40CA → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40CA replacement with price, stock and lead time, usually within 7-8 hours.