This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 40mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM.
- BoreØ32 mm
- Stroke40 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM
The AirTAC MSAL32X40SCM is a discontinued single-acting push cylinder with a 32mm bore and 40mm stroke. Air extends the rod to deliver 317.7N of usable push force at 0.5MPa, while an internal spring retracts it for a fail-safe home position. The exact drop-in replacement is the MSBL32X40SCM, matching the bore, stroke, G1/8 port, and CM mounting.
This -S variant includes a magnet for legacy CS1-M or DS1-M reed switches; the MSBL successor upgrades to CMSG, DMSG, or EMSG sensors. The original MSAL features threaded covers, whereas the modern MSBL uses a riveted rolling-packed body. End-of-stroke deceleration relies on a fixed rubber bumper, as no adjustable cushion exists on this series.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×40 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM Is Used
PCB Router Ejector
Pushes singulated circuit boards out of a routing fixture with 317.7N at 0.5MPa, retracting automatically when air drops.
Aluminum Extrusion Gate
Acts as a diverter flap on a conveyor line, using the spring return to safely open the path during an air loss event.
Bearing Housing Stamper
Provides a short 40mm stamping impact for bearing housings, relying on the fixed rubber bumper to absorb end energy.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM
To replace this MSAL32X40SCM, install the MSBL32X40SCM. Confirm the 32mm bore, 40mm stroke, PT G1/8 port, M10x1.25 rod thread, and CM round-end back cover. You must also swap your CS1-M/DS1-M sensors for CMSG/DMSG/EMSG switches. Remember the 0.2MPa minimum operating pressure required to overcome the return spring, and never apply an external load on the spring return stroke.
If sizing a new build, step down to a 25mm bore for 176.4N push at 0.5MPa, or step up to a 40mm bore for 539.9N at 0.5MPa. With a 40mm stroke on this compact body, ensure front guide alignment to prevent rod side-loading and premature seal wear.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM FAQ
Yes, the MSAL32X40SCM is discontinued. The exact drop-in replacement is the MSBL32X40SCM, which matches the 32mm bore, 40mm stroke, and CM mounting. You will need to upgrade your CS1-M or DS1-M switches to the CMSG, DMSG, or EMSG sensor family.
The usable push force is 317.7N at 0.5MPa and 478.5N at 0.7MPa, equating to roughly 48kgf maximum. The operating pressure range is 0.2-1.0MPa, with a 0.2MPa minimum required to overcome the return spring.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X40SCM → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X40SCM replacement with price, stock and lead time, usually within 7-8 hours.