This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 60mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA
The AirTAC MSAL32X60CA is a discontinued single-acting push, spring-return mini cylinder. Air extends the 12mm rod for a 60mm stroke, while an internal spring retracts it to a fail-safe home when air is removed. This 32mm bore SKU delivers 317.7N of usable push force at 0.5 MPa (478.5N at 0.7 MPa). The exact drop-in replacement is the MSBL32X60CA, matching the bore, stroke, G1/8 port, and CA clevis mounting.
This non-magnet SKU cannot accept a position sensor. As an upgrade fact, the legacy MSAL uses threaded covers and older CS1-M/DS1-M switches, whereas the MSBL features a riveted rolling-packed body and modern CMSG/DMSG/EMSG sensors. End-of-stroke deceleration relies on a fixed rubber bumper, not an adjustable cushion. Apply no external load on the unpowered return stroke to avoid damaging the return spring.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA Is Used
Packaging Flap Folding
Uses the 317.7N push force at 0.5 MPa to tuck cardboard flaps on cartoners, with the spring ensuring the arm retracts clear if air pressure drops.
Stamping Press Ejector
Ejects small aluminum brackets from a die using the 478.5N output at 0.7 MPa, relying on the fixed rubber bumper to absorb end-stroke impact.
Textile Loom Guide
Shifts a yarn guide arm into position; the CA clevis allows the arc motion needed for loom timing, while the spring provides a safe retracted rest.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA
Replace this MSAL32X60CA with the MSBL32X60CA by confirming the 32mm bore, 60mm stroke, PT G1/8 port, M10x1.25 rod-end thread, and CA pivot back cover. Because this SKU lacks the -S magnet, it cannot hold a sensor; if position detection is needed, step up to an MSBL32X60SCA and use CMSG/DMSG/EMSG switches. Maintain a minimum 0.2 MPa operating pressure to overcome the return spring.
For sizing flexibility, stepping down to the 25mm bore yields 176.4N of push force at 0.5 MPa, while stepping up to the 40mm bore provides 539.9N at 0.5 MPa via its larger G1/4 port. The CA pivot back cover swings on a pin to accommodate arcing loads. For this 60mm stroke on a 32mm bore, check side-load alignment to prevent rod bending.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA FAQ
Yes, the MSAL32X60CA is discontinued. The exact drop-in replacement is the MSBL32X60CA, which matches the 32mm bore, 60mm stroke, G1/8 port, and CA mounting. The MSBL upgrades the body to a riveted rolling-packed design.
This single-acting push cylinder provides 317.7N of usable force at 0.5 MPa and 478.5N at 0.7 MPa. The maximum force is 791.1N at 1.0 MPa. It requires a minimum of 0.2 MPa to overcome the internal return spring.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X60CA → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X60CA replacement with price, stock and lead time, usually within 7-8 hours.