This model is discontinued
AirTAC has phased out the MSAL series. You can still order this code here: we ship the direct replacement MSBL32X75SCM, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø32mm bore and 75mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the direct replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM
The AirTAC MSAL32X75SCM is a discontinued single-acting push, spring-return mini cylinder. Air extends the rod for the work stroke, while an internal spring retracts it to a fail-safe home when air is released. For this 32mm bore, usable push force is 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa. The direct replacement is the MSBL32X75SCM, matching the 75mm stroke, G1/8 port, and CM cover.
This SKU features a -S magnet compatible with older CS1-M and DS1-M reed switches; the MSBL successor upgrades to CMSG, DMSG, or EMSG sensors. The MSAL body uses threaded covers, whereas the modern MSBL features a riveted rolling-packed body. A fixed rubber bumper absorbs end-of-stroke impact, as no adjustable cushion exists. Apply no external load on the spring return stroke.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM carries the same single-acting ratings.
Usable Push Force (Ø32mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 317.7 N |
| 0.7 MPa | 478.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM Is Used
PCB Router Ejection
Deploys 317.7 N at 0.5 MPa to push cut printed circuit boards out of a routing fixture, using the spring return to clear the zone for the next panel.
Bottle Capper Press
Applies a 478.5 N @0.7 MPa downward press to seat screw caps on a filling line, with the fail-safe home lifting the head if air pressure drops.
Textile Loom Gate
Extends 75mm to deflect yarn paths during weaving pattern changes, retracting instantly via spring when the 3/2 valve vents.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM
To replace this MSAL32X75SCM, install the direct replacement MSBL32X75SCM. Confirm the 32mm bore, 75mm stroke, G1/8 PT port, M10x1.25 rod-end, CM round-end cover, and -S magnet. Note the sensor family change from CS1-M/DS1-M to CMSG/DMSG/EMSG. Minimum operating pressure is 0.2 MPa to overcome the return spring.
Size both ways: step down to bore 25 (176.4 N push @0.5 MPa) for lighter ejection, or step up to bore 40 (539.9 N @0.5 MPa) for heavier pressing. With a 75mm stroke on a 32mm bore, check rod-bending limits and avoid excessive side loads.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM FAQ
Yes, the MSAL32X75SCM is discontinued. The direct replacement is the MSBL32X75SCM, retaining the same 32mm bore, 75mm stroke, G1/8 port, and CM mounting. You must upgrade switches from CS1-M/DS1-M to CMSG/DMSG/EMSG.
Usable push force is 317.7 N at 0.5 MPa and 478.5 N at 0.7 MPa (max 48.8 kgf). Minimum pressure is 0.2 MPa. It is single-acting push, spring-return, with a fixed rubber bumper and no adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM replaces this model 1:1.
Fast Dispatch
MSBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL32X75SCM → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM)
Tell us the quantity and destination — we quote the direct AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL32X75SCM replacement with price, stock and lead time, usually within 7-8 hours.