This model is discontinued
AirTAC has phased out the MSAL series. You can still order this code here: we ship the direct replacement MSBL40X60SCM, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø40mm bore and 60mm stroke, G1/4 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the direct replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM.
- BoreØ40 mm
- Stroke60 mm
- Port sizeG1/4
- Acting typeSingle acting, push (spring return)
- Rod threadM12×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM
The AirTAC MSAL40X60SCM is a discontinued single-acting push cylinder with a 40mm bore and 60mm stroke. Air extends the rod to do work, while an internal spring retracts it to a fail-safe home when air is removed. It delivers a usable push force of 539.9 N at 0.5 MPa and 791.1 N at 0.7 MPa. The direct replacement is the MSBL40X60SCM, matching the bore, stroke, G1/4 port, and CM mounting.
This -S variant includes a magnet for position sensing, using the older CS1-M or DS1-M switches. The MSBL upgrade transitions to CMSG, DMSG, or EMSG sensors. This MSAL features threaded covers, whereas the MSBL uses a riveted rolling-packed body. It uses a fixed rubber bumper for end-of-stroke damping, and you must apply no external load on the unpowered spring return stroke.
Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM carries the same single-acting ratings.
Usable Push Force (Ø40mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 539.9 N |
| 0.7 MPa | 791.1 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM Is Used
Stamping Press Ejector
Ejects formed sheet metal blanks from a stamping die using 539.9 N of push force at 0.5 MPa, relying on the spring return to clear the die bed safely.
Woodworking Door Clamp
Holds cabinet doors steady during hinge routing on a CNC machine, using the fail-safe spring return to release the part if shop air drops.
Packaging Divert Gate
Pushes a mechanical diverter gate to route heavy cardboard cartons on a conveyor, with the unpowered return stroke pulling the gate back to home.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM
To replace this MSAL40X60SCM, specify the MSBL40X60SCM to keep the 40mm bore, 60mm stroke, G1/4 port, M12x1.25 rod thread, CM round-end cover, and magnet. Remember the sensor family changes from CS1-M/DS1-M to CMSG/DMSG/EMSG. A minimum 0.2 MPa air pressure is required to overcome the return spring.
If sizing force, stepping down to the 32mm bore drops output to 317.7 N at 0.5 MPa, while stepping up is unavailable as 40mm is the largest standard MAL bore. At 60mm stroke on this large bore, side-load and rod-bending risks are moderate, so ensure rigid front-guide alignment. Never apply an external load on the spring return stroke.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM FAQ
Yes, the MSAL40X60SCM is discontinued. The direct replacement is the MSBL40X60SCM, matching the 40mm bore, 60mm stroke, G1/4 port, and CM cover. You will need to upgrade your position sensors from the old CS1-M/DS1-M series to the new CMSG/DMSG/EMSG series.
This single-acting push cylinder provides a usable force of 539.9 N at 0.5 MPa and 791.1 N at 0.7 MPa, with a maximum output of 80.7 kgf. It requires a minimum operating pressure of 0.2 MPa to overcome the internal return spring, and uses a fixed rubber bumper rather than an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM replaces this model 1:1.
Fast Dispatch
MSBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60SCM → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM)
Tell us the quantity and destination — we quote the direct AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60SCM replacement with price, stock and lead time, usually within 7-8 hours.