This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA
The AirTAC Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 25mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the drop-in replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA
The AirTAC MTAL32X25SCA is a discontinued single-acting pull-type mini cylinder. Air retracts the rod, while an internal spring extends it, meaning the fail-safe home position is extended. This 32 mm bore provides a usable pull force of 261.2 N at 0.5 MPa. The direct drop-in replacement is the MTBL32X25SCA, matching the bore, stroke, and force class.
This SKU features a CA pivot back cover that swings on a pin to absorb arcing loads. The -S magnet works with CS1-M/DS1-M switches, though the MTBL upgrade shifts to CMSG/DMSG/EMSG sensors and uses a riveted rolling-packed body instead of the MTAL's threaded covers. A fixed rubber bumper absorbs end-of-stroke impact.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA carries the same single-acting ratings.
Usable Pull Force (Ø32mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 261.2 N |
| 0.7 MPa | 399.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×25 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA Is Used
Packaging Flap Tensioning
Pulls a carton flap taut during tape application. The 261.2 N pull at 0.5 MPa handles the resistance, and the spring-extended fail-safe releases the flap if air drops.
Lathe Chuck Drawbar
Retracts a small collet drawbar against workpiece resistance. The CA pivot cover accommodates slight misalignment during the 25 mm pull stroke.
PCB Test Socket Retract
Pulls a test contact block away from a board. The fixed rubber bumper softens the retracted stop, protecting delicate electronics from shock.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA
To replace this MTAL32X25SCA, order the MTBL32X25SCA. Confirm the 32 mm bore, 25 mm stroke, G1/8 port, PT thread, CA back cover, and magnet. The -S magnet requires changing from CS1-M/DS1-M to CMSG/DMSG/EMSG sensors. Operating pressure is 0.2-1.0 MPa. The fail-safe home is extended, so apply no external load on the spring-extend stroke.
If sizing up or down, the 25 mm bore gives 137.2 N at 0.5 MPa, while the 40 mm bore yields 439.4 N at 0.5 MPa. This 25 mm stroke is short, keeping rod bending stress low.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA FAQ
Yes, the MTAL32X25SCA is discontinued. The exact drop-in replacement is the MTBL32X25SCA, matching the 32 mm bore, 25 mm stroke, and CA pivot cover. You must update your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
It is a single-acting pull cylinder with a fail-safe extended home. Usable pull force is 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa. Operating pressure is 0.2-1.0 MPa with a fixed rubber bumper.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA replaces this model 1:1.
Fast Dispatch
MTBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X25SCA → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA)
Tell us the quantity and destination — we quote the drop-in AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X25SCA replacement with price, stock and lead time, usually within 7-8 hours.