This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA
The AirTAC Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 75mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the drop-in replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeSingle acting, pull (spring extend)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA
The AirTAC MTAL32X75CA is a discontinued 32mm mini cylinder configured for single-acting pull with a spring-extend fail-safe. Compressed air retracts the rod, while an internal spring pushes it back out. It delivers a usable pull force of 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa.
The exact drop-in replacement is the MTBL32X75CA, retaining the same 75mm stroke, G1/8 port, and CA clevis mount. The MTAL uses threaded covers and a fixed rubber bumper for end-of-stroke damping. Because this specific SKU lacks the -S magnet option, it cannot accept a position sensor.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA carries the same single-acting ratings.
Usable Pull Force (Ø32mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 261.2 N |
| 0.7 MPa | 399.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA Is Used
Lathe Chuck Unclamping
Pulls the actuator to open a lathe collet chuck, yielding 261.2N at 0.5MPa to release the part, with the spring extending the rod to a safe open rest position.
Conveyor Diverter Arm
Retracts a pneumatic sorting flap on a packaging line; the CA clevis swings smoothly on its pin while the spring-extend home parks the flap out of the product flow.
Press Brake Die Release
Draws back a locating pin on a press brake tooling cart, using the 399.4N at 0.7MPa pull force to overcome friction before the internal spring ejects the pin.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA
To replace the MTAL32X75CA with the MTBL32X75CA, confirm the 32mm bore, 75mm stroke, PT G1/8 port, M10x1.25 rod-end thread, and CA back cover. The MTBL is a drop-in upgrade, but note the sensor family changes from CS1-M/DS1-M to CMSG/DMSG/EMSG if you later switch to a magnetized model. This SKU has no magnet and cannot take a sensor. Operating pressure must be at least 0.2 MPa. The fail-safe home is extended, so apply no external load on the spring extend stroke.
For sizing, step down to the 25mm bore if you need less force (137.2 N at 0.5 MPa), or step up to the 40mm bore for heavier pulls (439.4 N at 0.5 MPa). At 75mm stroke, watch for rod-bending side loads.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA FAQ
Yes, the MTAL32X75CA is discontinued. The exact drop-in replacement is the MTBL32X75CA, which matches the 32mm bore, 75mm stroke, G1/8 port, and CA clevis mount.
It is a single-acting pull cylinder with a spring-extend fail-safe home. The usable pull force is 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa. It requires a minimum of 0.2 MPa to retract the rod against the spring.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA replaces this model 1:1.
Fast Dispatch
MTBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X75CA → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA)
Tell us the quantity and destination — we quote the drop-in AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X75CA replacement with price, stock and lead time, usually within 7-8 hours.