This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA
The AirTAC Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø40mm bore and 35mm stroke, G1/4 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the drop-in replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA.
- BoreØ40 mm
- Stroke35 mm
- Port sizeG1/4
- Acting typeSingle acting, pull (spring extend)
- Rod threadM12×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA
The AirTAC MTAL40X35CA is a discontinued single-acting pull-type mini cylinder. Air retracts the rod while an internal spring extends it, ensuring a fail-safe extended home position. It delivers a usable pull force of 439.4 N at 0.5 MPa and 650.4 N at 0.7 MPa. The drop-in replacement is the MTBL40X35CA, matching the 40mm bore, 35mm stroke, G1/4 port, and CA clevis.
This SKU features a CA pivot back cover that swings on a pin to absorb arcing loads. It uses a fixed rubber bumper and threaded covers, whereas the MTBL upgrade uses a riveted rolling-packed body. Because this model lacks the -S magnet option, it cannot accept a position sensor; the MTBL upgrade requires CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M types.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA carries the same single-acting ratings.
Usable Pull Force (Ø40mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 439.4 N |
| 0.7 MPa | 650.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×35 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA Is Used
Lathe Chuck Unclamping
Retracts the lathe collet pull bar with 439.4 N at 0.5 MPa to release parts, relying on the spring-extend fail-safe to safely re-engage the chuck on air loss.
Packaging Flap Tucking
Pulls carton sealing levers during the packaging cycle, with the CA pivot absorbing arcing mechanical loads without binding.
Press Brake Guard Retract
Draws back a light curtain safety guard on press brakes; the fixed rubber bumper absorbs the stop impact at the end of the 35mm stroke.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA
To replace the MTAL40X35CA, use the MTBL40X35CA. Confirm the 40mm bore, 35mm stroke, G1/4 port, PT thread, and CA clevis. Note the sensor change: this no-magnet SKU cannot take a sensor, while the MTBL uses CMSG/DMSG/EMSG. Maintain a minimum 0.2 MPa operating pressure and apply no external load on the spring extend stroke, as the fail-safe home is extended.
For sizing flexibility, stepping down to the 32mm bore yields 261.2 N pull at 0.5 MPa. The 40mm bore is the largest standard mini size, so no larger single-acting pull neighbor exists. The 35mm stroke is well under the 100mm standard limit, minimizing rod-bending side-load risks.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA FAQ
Yes, the MTAL40X35CA is discontinued. The exact drop-in replacement is the MTBL40X35CA, which matches the 40mm bore, 35mm stroke, G1/4 port, and CA pivot mounting. The MTBL upgrades to a riveted body and uses CMSG/DMSG/EMSG sensors.
It is a single-acting pull cylinder where air retracts the rod and the spring extends it. The fail-safe home is extended. The usable pull force is 122.9 N at 0.2 MPa, 439.4 N at 0.5 MPa, and 650.4 N at 0.7 MPa. It requires a minimum of 0.2 MPa to overcome the return spring.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA replaces this model 1:1.
Fast Dispatch
MTBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X35CA → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA)
Tell us the quantity and destination — we quote the drop-in AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X35CA replacement with price, stock and lead time, usually within 7-8 hours.