This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM
The AirTAC Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø40mm bore and 60mm stroke, G1/4 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the drop-in replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM.
- BoreØ40 mm
- Stroke60 mm
- Port sizeG1/4
- Acting typeSingle acting, pull (spring extend)
- Rod threadM12×1.25
- StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM
About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM
The AirTAC MTAL40X60CM is a discontinued single-acting pull-type mini cylinder with a 40mm bore and 60mm stroke. Air retracts the rod while an internal spring extends it, yielding a fail-safe extended home position. It delivers a usable pull force of 439.4 N at 0.5 MPa. The direct drop-in replacement is the MTBL40X60CM, matching the bore, stroke, G1/4 port, and CM mounting.
This SKU features a CM round-end back cover and PT tapered port thread. Because it lacks the -S option, it cannot accept a position sensor. The original MTAL uses threaded covers and a fixed rubber bumper; upgrading to the MTBL brings a riveted rolling-packed body. Apply no external load on the spring extend stroke to avoid bending the 16mm rod.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM Technical Specifications
| Model | Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Single acting, pull (spring extend) |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 100 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM carries the same single-acting ratings.
Usable Pull Force (Ø40mm)
| Pressure | Pull force (net of spring) |
|---|---|
| 0.5 MPa | 439.4 N |
| 0.7 MPa | 650.4 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM
| MTAL | Single acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).
Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM Is Used
Injection Mold Ejector Reset
Pulls the ejector plate back inside a 40mm mold base during clamp-up, using 439.4 N at 0.5 MPa to overcome stripper friction before the mold closes.
Packaging Lid Tensioner
Draws back a carton folder mechanism on a rotary filling line, relying on the spring-extended fail-safe to clear the path when air drops at 0.2 MPa.
Welding Fixture Drawbar
Retracts a 16mm rod-linked drawbar to release a chassis subassembly jig, using the CM round-end cover for direct rear pivot mounting.
Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM
To replace this MTAL40X60CM, specify the MTBL40X60CM and confirm the 40mm bore, 60mm stroke, PT G1/4 port, M12x1.25 rod thread, and CM round-end cover. The MTBL retains the 0.2-1.0 MPa operating range and 50-800 mm/s speed, but note the sensor family changes from CS1-M/DS1-M to CMSG/DMSG/EMSG if you ever add a magnet. Since this no-S SKU has no sensor, you lose nothing functionally in the swap.
For sizing flexibility, stepping down to the 32mm bore drops the 0.5 MPa pull force to 261.2 N, while stepping up is not available as 40mm is the largest in this series. Remember the fail-safe home is EXTENDED, and you must never apply external load to the unpowered spring extend stroke. A fixed rubber bumper absorbs end-of-stroke impact.
Upgrade checklist
- ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM (same bore/stroke/force)
- ✓ Same pull direction and extended fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM instead of this discontinued model.
Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM FAQ
Yes, the MTAL40X60CM is discontinued. The exact drop-in replacement is the MTBL40X60CM, which matches the 40mm bore, 60mm stroke, G1/4 port, and CM cover. The MTBL upgrades the body to a riveted rolling-packed design from the original threaded covers.
This single-acting pull cylinder operates at 0.2-1.0 MPa with speeds of 50-800 mm/s. The usable pull force is 439.4 N at 0.5 MPa and 650.4 N at 0.7 MPa. It uses a fixed rubber bumper, lacks adjustable cushioning, and this specific no-magnet SKU cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM replaces this model 1:1.
Fast Dispatch
MTBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MTBL Replacements
Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL40X60CM → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM)
Tell us the quantity and destination — we quote the drop-in AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL40X60CM replacement with price, stock and lead time, usually within 7-8 hours.