Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10 is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø16mm bore it gives a nominal 60mm stroke with a 10mm fine-adjustable window — settable from 50 to 60mm, so you set the end position without changing hardware.
- BoreØ16 mm
- Nominal stroke60 mm
- Adjust window10 mm
- Effective range50–60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10
The AirTAC PBJ16X60-10 is a JIS pen-size double-acting mini cylinder with a 10mm adjustable stroke window. A rear screw and lock nut shorten the retract end, giving an effective stroke range of 50-60mm. The extend end remains fixed. The M5x0.8 air port and Ø5mm stainless rod keep the body slim for tight jigs.
Good practice loads a cylinder to roughly 60% of its theoretical force to offset seal friction, so plan for about 60N of real work at 0.5MPa. The fixed TPU bumper decelerates the last few millimetres of travel. Over long strokes or off-axis loads, add an external guide because the Ø5mm rod is built for coaxial thrust, not side load.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 60 mm |
| Adjustable window | 10 mm (50–60 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10 Is Used
Changeover Fixtures
Quickly tune the 50-60mm retract length when swapping product families on a shared jig, eliminating the need to physically swap cylinders or disassemble hardware.
Trial Insertion Stops
Dial in the exact insertion depth during prototype runs. The rear M5x0.8 adjuster screw lets you fine-tune the end position without reprogramming the machine.
Variable-Depth Pressing
Set precise pressing endpoints on the fly for different material thicknesses. The fixed TPU bumper ensures consistent end-of-stroke deceleration across the adjusted range.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10 the Right Cylinder?
Select the PBJ16X60-10 if your layout needs exactly 50-60mm of travel. Remember that only the retract position is field-settable; the extend end is fixed. Always re-tighten the lock nut after setting to prevent vibration drift. Confirm your ordering essentials: 16mm bore, 60mm nominal stroke, 10mm window, no magnet, and your preferred mounting option.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 50–60 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10 FAQ
The effective stroke range is 50-60mm. At 0.5MPa, push force is 100.5N and pull force is 90.7N. At the maximum 0.7MPa operating pressure, push is 140.7N and pull is 126.9N. Adjusting the stroke does not alter these force values.
A rear screw shortens the retract end, meaning only the back position is settable while the extend end remains fixed. After setting your desired length, re-tighten the lock nut to prevent vibration drift. Note that a plain PBJ does not hold position on air loss; the piston drifts and an external rod lock is required for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.