Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10 is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø16mm bore it gives a nominal 75mm stroke with a 10mm fine-adjustable window — settable from 65 to 75mm, so you set the end position without changing hardware.
- BoreØ16 mm
- Nominal stroke75 mm
- Adjust window10 mm
- Effective range65–75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10
The AirTAC PBJ16X75-10 is a double-acting, double-rod pen-size mini cylinder featuring a 10mm adjustable-stroke window. A rear adjuster screw shortens the retract end, giving an effective stroke range of 65-75mm. The M5x0.8 air port and M10x1.0 rod-end thread match the bore standard. The rod is Ø5mm stainless steel. A fixed TPU bumper cushions both ends.
Because the extend end is fixed, layout planning must account for rear-only length changes. After setting your exact dimension, re-tighten the lock nut to prevent vibration drift.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 75 mm |
| Adjustable window | 10 mm (65–75 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10 Is Used
Changeover Fixtures
Rapidly adapt product changeover stops on packaging lines by dialing the rear screw to shift the retract position from 65 to 75mm without swapping hardware.
Variable Assembly Stops
Set multiple end-of-stroke positions on automated assembly jigs, locking the M5x0.8 adjuster nut to hold the 65-75mm range securely against vibration.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10 the Right Cylinder?
Stepping down to a 12mm bore drops the push force to 56.5N, while moving up to a larger profile yields substantially more thrust. Select this 75mm nominal stroke model if your fixture requires a precise 65-75mm field-set retract. Remember that only the back position is adjustable; the extend end remains fixed. Confirm your ordering essentials: 16mm bore, 75mm stroke, 10mm window, no magnet, and your preferred mounting option.
The thin Ø5mm rod is built for coaxial thrust. Over long strokes or with off-axis loads, add an external guide or linear bearing to prevent side-load damage. The fixed TPU bumper only decelerates the last few millimeters, so at higher speeds with real tooling mass, meter-out the exhaust or fit an external shock absorber.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 65–75 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10 FAQ
The effective stroke range is 65-75mm.
A rear adjuster screw with an M5x0.8 thread shortens the retract end by up to 10mm. The extend end is fixed. You must re-tighten the lock nut after setting the desired position to prevent vibration drift. This cylinder does not hold position on air loss without an external stop.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X75-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.