Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S
SUS304 stainless variant (-S)The AirTAC Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S is a genuine male branch tee for push-in tube connection, rated 0 - 1.0 MPa (0 - 10 kgf/cm2) with a 1.5 MPa proof pressure.
- TypeMale branch tee
- SeriesPEB
- Working pressure0 - 1.0 MPa (0 - 10 kgf/cm2)
- Proof pressure1.5 MPa
- Temperature-20 to +70 °C
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S
AirTAC's PEB is a one-touch male branch tee: a Dia 10 mm main run that also pushes a Dia 10 branch off a male 1/8 inch PT stud. Push soft nylon or polyurethane tube home and the internal chuck grips it; press the POM release ring and the tube frees. Because this is the resin and brass one-touch line, it carries the 0-1.0 MPa working pressure, 1.5 MPa proof pressure and -20 to +70 C range, and it holds -750 mmHg in vacuum circuits.
The -S suffix fits a SUS304 stud in place of the standard brass one, so the threaded connection itself resists corrosion where it meets a wet or splashed mounting plate; the tee body stays PBT in black, the D-suffix colour. Every dimension matches the standard PEB1001 exactly, and AirTAC ships threaded parts with sealant already applied, so it screws straight into a PT port without extra paste or tape on the sealing surfaces.
Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S Technical Specifications
| Model | Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S |
|---|---|
| Type | Male branch tee |
| Series | PEB |
| Connection | Push-in one-touch |
| Body material | Stainless steel 304 (-S variant) |
| Working pressure | 0 - 1.0 MPa (0 - 10 kgf/cm2) |
|---|---|
| Negative pressure | -750 mmHg (10 Torr) |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Applicable tubing | Soft nylon or polyurethane tube |
| Thread standard | PT (Rc tapered) unless the code says otherwise |
POM release button and chuck, aluminium-alloy guide, stainless spring gasket, NBR O-ring; body brass or PBT depending on the part. Stainless (-S): SUS304 in place of brass - a solid SUS304 body on the PC and POC straight connectors, and a PBT body with a SUS304 stud on the elbow, tee and branch shapes. Working pressure, proof pressure and temperature are unchanged from the standard version. AirTAC publishes flow as a characteristic curve rather than a single figure, so no L/min value is listed.
Model Code: Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S
| PEB | Male branch tee. |
|---|---|
| 4 / 6 / 8 / 10 / 12 | Tube outside diameter in mm (3.2 mm exists on the mini series). |
| M5 / 01 / 02 / 03 / 04 | Thread: M5x0.8, 1/8", 1/4", 3/8", 1/2" (M3 on the mini series). |
| D | Black. Blank = grey. |
| -S | Stainless-steel body. |
Fitting & Sealing Notes
- check Cut the tube square and clean before pushing it home, or the seal will leak.
- check Push until it stops, then pull back to check the chuck has gripped.
- check To release, press the collet ring fully in and pull the tube out.
- check Threaded parts arrive with sealant on the thread; M5 sizes use a sealing gasket.
- check Match the tube OD exactly - a 6 mm fitting will not hold 1/4" tube.
Where the Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S Is Used
Carton sealer blow-off branch
On a packaging machine's 10 mm air drop, the branch tees off to feed a nozzle that clears dust from the glue head, all from a single 1/8 inch stud on the manifold plate.
CNC tool-zone chip blast
Tee a Dia 10 line at the machine column and take a branch to an air jet that clears chips from the spindle area, using the existing tapped port on the bracket.
Bottling line wash-down plate
Where the stud threads into a wet plate on a bottling or rinsing conveyor, the SUS304 male thread stands up to splashing that would pit a plain brass stud.
Is the Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S the Right Part?
Two real neighbours frame this SKU. Step down to PEB801 to drop the branch and run to 8 mm tube on the same 1/8 inch stud; step the thread up to PEB1002 (Dia 10, 1/4 inch) when the tapped port is bigger than the tube. Note that the 1/8 inch row of the PEB ladder tops out at Dia 10, so no larger tube exists on this thread - a larger bore forces you up to the 1/4 inch stud. Match the thread to the port and the tube to the socket: a Dia 10 fitting will not grip 1/2 inch or 3/8 inch hose, the OD must match exactly.
Quick checklist
- ✓ Tube outside diameter matches exactly
- ✓ Thread size and standard match the port
- ✓ Working pressure within 0 - 1.0 MPa (0 - 10 kgf/cm2)
- ✓ Temperature within -20 to +70 °C
Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S FAQ
Working pressure 0-1.0 MPa (0-10 kgf/cm2), proof pressure 1.5 MPa, vacuum capability -750 mmHg (10 Torr), temperature -20 to +70 C. The fitting joins Dia 10 mm soft nylon or polyurethane tube on both the main run and the branch to a 1/8 inch PT male stud, with the body in black PBT and the stud in SUS304.
No. On PEB fittings the SUS304 replaces the brass on the stud only; the body stays PBT and every pressure, vacuum, temperature and dimension figure is identical to the standard PEB1001, so it drops into the same tapped hole. What the suffix does not buy you is a re-rating - treat it as a same-spec part with a corrosion-resistant thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard parts are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC One-Touch Fittings
Request a Quote for Airtac PEB T-Shaped Straight Thread Tee Connector PEB1001D-S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.