Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D
The AirTAC Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D is a genuine male branch tee for push-in tube connection, rated 0 - 1.0 MPa (0 - 10 kgf/cm2) with a 1.5 MPa proof pressure.
- TypeMale branch tee
- SeriesPEB
- Working pressure0 - 1.0 MPa (0 - 10 kgf/cm2)
- Proof pressure1.5 MPa
- Temperature-20 to +70 °C
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D
The PEB1002D is an AirTAC PEB male branch tee, a one-touch fitting that passes Dia 10 mm tubing straight through the run and puts a 90 degree branch with a male 1/4 in PT thread off the side. Push the tube into the chuck and the stainless spring gasket grips it for a sealed joint; press the POM release ring and the tube comes free for rework. Unlike a union tee, the branch carries its own external thread, so the drop line screws straight onto a valve, cylinder or FRL port with no extra adaptor.
This is the resin and brass profile, not the metal BP line: working pressure 0-1.0 MPa (0-10 kgf/cm2), vacuum to -750 mmHg, proof pressure 1.5 MPa, and a service range of -20 to +70 C with soft nylon or polyurethane tubing. On the PEB series the trailing D changes the whole body to black, not just the button, so the fitting reads as part of a black-fitted machine. The 1/4 in stud arrives with sealant already on the thread, and the POM chuck, aluminium guide and NBR O-ring do the sealing work on the tube side.
Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D Technical Specifications
| Model | Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D |
|---|---|
| Type | Male branch tee |
| Series | PEB |
| Connection | Push-in one-touch |
| Working pressure | 0 - 1.0 MPa (0 - 10 kgf/cm2) |
|---|---|
| Negative pressure | -750 mmHg (10 Torr) |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Applicable tubing | Soft nylon or polyurethane tube |
| Thread standard | PT (Rc tapered) unless the code says otherwise |
POM release button and chuck, aluminium-alloy guide, stainless spring gasket, NBR O-ring; body brass or PBT depending on the part. AirTAC publishes flow as a characteristic curve rather than a single figure, so no L/min value is listed.
Model Code: Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D
| PEB | Male branch tee. |
|---|---|
| 4 / 6 / 8 / 10 / 12 | Tube outside diameter in mm (3.2 mm exists on the mini series). |
| M5 / 01 / 02 / 03 / 04 | Thread: M5x0.8, 1/8", 1/4", 3/8", 1/2" (M3 on the mini series). |
| D | Black. Blank = grey. |
Fitting & Sealing Notes
- check Cut the tube square and clean before pushing it home, or the seal will leak.
- check Push until it stops, then pull back to check the chuck has gripped.
- check To release, press the collet ring fully in and pull the tube out.
- check Threaded parts arrive with sealant on the thread; M5 sizes use a sealing gasket.
- check Match the tube OD exactly - a 6 mm fitting will not hold 1/4" tube.
Where the Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D Is Used
CNC fixture clamp drop
Take a 1/4 in branch off a Dia 10 mm supply run on a machining fixture and feed the pneumatic clamp valve directly from the threaded leg, keeping the run itself unbroken for downstream clamps.
Bottle-line air blast jet
On a bottle-rinse conveyor, branch off the Dia 10 mm header with the PEB1002D and screw a nozzle assembly to the 1/4 in stud to deliver a spot air jet over each container as it passes.
Press counterbalance circuit
On a small mechanical press, use the branch leg to feed the counterbalance cylinder while the Dia 10 mm run continues to the main directional valve, all through one black-body fitting inside the guard.
Is the Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D the Right Part?
Step down to PEB802D when the branch feeds Dia 8 mm tooling such as a compact gripper, and up to PEB1202D when the run carries main-header volume to a larger actuator; the thread stays 1/4 in on both, so only the bore changes. On Dia 10 mm you can also pick a different branch thread on this same prefix: PEB1001D on 1/8 in and PEB1003D on 3/8 in are both real parts, which makes Dia 10 the one tube size served by every thread in the PEB ladder.
Match the thread to the port, not the tube: a 1/4 in PT stud with sealant suits the majority of valve and cylinder ports at this flow level. The tube OD must match exactly - this chuck holds Dia 10 mm only and will not seal on 3/8 in or 12 mm tube, even though those sizes look close. If you need to pass the tee itself through a panel wall, use the PM bulkhead series instead of the PEB.
Quick checklist
- ✓ Tube outside diameter matches exactly
- ✓ Thread size and standard match the port
- ✓ Working pressure within 0 - 1.0 MPa (0 - 10 kgf/cm2)
- ✓ Temperature within -20 to +70 °C
Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D FAQ
It is an AirTAC PEB male branch tee joining Dia 10 mm tubing to a 1/4 in PT male branch thread. Working pressure is 0-1.0 MPa (0-10 kgf/cm2), negative pressure to -750 mmHg, proof pressure 1.5 MPa, and the temperature range is -20 to +70 C. It is for soft nylon or polyurethane tube, with a POM release ring, brass threaded stud pre-coated with sealant, and an NBR O-ring seal.
No. On the PEB series the D suffix changes the body colour to black only; every pressure, vacuum and temperature figure is identical to the standard grey part, and the dimensions match too. Specify the D purely for appearance on machines built around black fittings, and order the plain PEB1002 if grey is preferred.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard parts are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC One-Touch Fittings
Request a Quote for Airtac PEB T-Shaped Straight Thread Tee Connector PEB1002D
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.