Airtac POC Round Thread Straight Connector POC1202-S
SUS304 stainless variant (-S)The AirTAC Airtac POC Round Thread Straight Connector POC1202-S is a genuine male connector (compact) for push-in tube connection, rated 0 - 1.0 MPa (0 - 10 kgf/cm2) with a 1.5 MPa proof pressure.
- TypeMale connector (compact)
- SeriesPOC
- Working pressure0 - 1.0 MPa (0 - 10 kgf/cm2)
- Proof pressure1.5 MPa
- Temperature-20 to +70 °C
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac POC Round Thread Straight Connector POC1202-S
The POC1202-S is the stainless-steel version of AirTAC's POC male connector, the deliberately compact body in the one-touch range. It joins Dia 12 mm soft nylon or polyurethane tube to a 1/4in PT male thread. Push the tube home and the internal chuck grips it; press the POM release ring and the tube frees off again. Unlike the elbow and tee families, where -S means only a stainless stud, the -S on a POC straight connector makes the whole body SUS304, and AirTAC states all parts of the assembly are copper-free.
The ratings are identical to the grey standard version: 0 to 1.0 MPa working pressure, 1.5 MPa proof pressure, -750 mmHg vacuum and -20 to +70 C. The stainless body buys corrosion resistance and copper-free construction, not extra pressure or temperature. Internals stay familiar: POM release button and chuck, aluminium-alloy guide, stainless spring gasket and an NBR O-ring.
Airtac POC Round Thread Straight Connector POC1202-S Technical Specifications
| Model | Airtac POC Round Thread Straight Connector POC1202-S |
|---|---|
| Type | Male connector (compact) |
| Series | POC |
| Connection | Push-in one-touch |
| Body material | Stainless steel 304 (-S variant) |
| Working pressure | 0 - 1.0 MPa (0 - 10 kgf/cm2) |
|---|---|
| Negative pressure | -750 mmHg (10 Torr) |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Applicable tubing | Soft nylon or polyurethane tube |
| Thread standard | PT (Rc tapered) unless the code says otherwise |
POM release button and chuck, aluminium-alloy guide, stainless spring gasket, NBR O-ring; body brass or PBT depending on the part. Stainless (-S): SUS304 in place of brass - a solid SUS304 body on the PC and POC straight connectors, and a PBT body with a SUS304 stud on the elbow, tee and branch shapes. Working pressure, proof pressure and temperature are unchanged from the standard version. AirTAC publishes flow as a characteristic curve rather than a single figure, so no L/min value is listed.
Model Code: Airtac POC Round Thread Straight Connector POC1202-S
| POC | Male connector (compact). |
|---|---|
| 4 / 6 / 8 / 10 / 12 | Tube outside diameter in mm (3.2 mm exists on the mini series). |
| M5 / 01 / 02 / 03 / 04 | Thread: M5x0.8, 1/8", 1/4", 3/8", 1/2" (M3 on the mini series). |
| D | Black. Blank = grey. |
| -S | Stainless-steel body. |
Fitting & Sealing Notes
- check Cut the tube square and clean before pushing it home, or the seal will leak.
- check Push until it stops, then pull back to check the chuck has gripped.
- check To release, press the collet ring fully in and pull the tube out.
- check Threaded parts arrive with sealant on the thread; M5 sizes use a sealing gasket.
- check Match the tube OD exactly - a 6 mm fitting will not hold 1/4" tube.
Where the Airtac POC Round Thread Straight Connector POC1202-S Is Used
Food-line wash-down actuator feed
A 12 mm supply run feeding a gate-clamp cylinder on a packaging machine that is hosed down each shift; the SUS304 body and NBR seal shrug off the water and caustic mist that pit brass studs.
Electronics plating-rack air drop
Copper-free all-parts construction matters above plating baths, where traces of dissolved copper can contaminate bath chemistry; the compact POC body also fits the crowded drop manifold.
Marine-hatch cylinder supply
Salt-laden deck air corrodes brass fittings quickly; a 1/4in PT stud straight into the directional valve port with 12 mm nylon tube keeps hatch-closing cylinders fed without a rusting fitting in the loop.
Is the Airtac POC Round Thread Straight Connector POC1202-S the Right Part?
On the 1/4in thread rung of the POC ladder this Dia 12 size is the top of the ladder; the step down is POC1002 with Dia 10 tube, which gives you a slightly slimmer line at the same port. If you need to move beyond Dia 12 you change thread rather than tube: POC1203 puts the same 12 mm tube on a 3/8in stud. Check your port before ordering - the 1/4in stud will not seal into a 3/8in hole, and adapters add leak points.
Because this is the compact body, it fits where the taller PC connector crowds adjacent ports on a manifold. And mind the tube: the chuck is cut for exactly Dia 12 mm OD, so 12.7 mm or 1/2in imperial tube will not seat.
Quick checklist
- ✓ Tube outside diameter matches exactly
- ✓ Thread size and standard match the port
- ✓ Working pressure within 0 - 1.0 MPa (0 - 10 kgf/cm2)
- ✓ Temperature within -20 to +70 °C
Airtac POC Round Thread Straight Connector POC1202-S FAQ
One-touch male connector, compact POC body, in SUS304 stainless. Tube: Dia 12 mm OD soft nylon or polyurethane. Thread: 1/4in PT male. Working pressure 0 to 1.0 MPa (0 to 10 kgf/cm2), proof pressure 1.5 MPa, vacuum to -750 mmHg (10 Torr), temperature -20 to +70 C. The -S changes the body material only; every pressure and temperature figure matches the standard grey POC1202.
No separate tape or compound is required - AirTAC ships these threaded POC parts with sealant already applied to the PT thread, so you can wind it straight into the port. Note that the Dia 12 mm tube must match exactly: a fitting cut for 12 mm tube will not grip 12.7 mm imperial tube, and forcing it is the usual cause of a blow-off at pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard parts are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC One-Touch Fittings
Request a Quote for Airtac POC Round Thread Straight Connector POC1202-S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.