Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R
The AirTAC Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R is a single acting, push type (spring return) pen-size mini cylinder with direct front-cover mounting (M4×0.7 thread). A single air port drives the push stroke on a Ø10mm bore, 10mm stroke; the return spring resets the rod when air is released.
- BoreØ10 mm
- Stroke10 mm
- Port sizeM5×0.8
- Front-mount threadM4×0.7
- Acting typePush, single acting
- ReturnSpring
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R
The AirTAC PSBR10X10R is a single-acting push pen cylinder with a 10 mm bore and 10 mm stroke. Air entering the M5x0.8 port extends the rod, while an internal spring retracts it. You get 29.8 N of net push at 0.5 MPa and 45.5 N at 0.7 MPa. The return spring ensures the rod pulls back safely on air loss.
This direct front-mount unit bolts straight into your fixture via an M4x0.7 front-cover thread, eliminating extra brackets. The SUS316L stainless barrel resists corrosion in damp environments. A fixed TPU bumper cushions the stroke ends.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R Technical Specifications
| Model | Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R |
|---|---|
| Series | PSBR JIS pen-size front-mount cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push type (spring return) |
| Front-mount thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Front cover carries the mounting thread (M4×0.7); barrel is SUS316L. Forces below are NET spring-deducted values. Confirm against the product label.
Net Push Force (Ø10mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 29.8 N |
| 0.7 MPa (max) | 45.5 N |
These are usable push forces after the return spring is subtracted, from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R
| PSBR | JIS pen-size front-mount single acting, push type (spring return) series. |
|---|---|
| 10 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| U / R | Back cover: U 90° side inlet or R axial inlet (bore-dependent). |
Mounting: direct front-cover thread (M4×0.7). Related PBR-family variants: PBR (double acting), PTBR (single-acting pull).
Where the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R Is Used
Part Ejector
Pushes lightweight machined parts off a conveyor line. The spring return keeps the arm retracted during air loss.
Panel Pusher
Extends to nudge thin electronic panels into a testing slot. The direct M4x0.7 front mount saves valuable jig space.
Clamp Release
Applies 29.8 N of push to disengage a secondary latch. The fail-safe spring design secures the latch when air drops.
Is the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R the Right Cylinder?
For this 10 mm bore, the net push is 29.8 N at 0.5 MPa. If you need less force, the 8 mm bore provides 18.7 N. If your fixture requires more thrust, step up to the 12 mm bore for 42.9 N. All three options use the M5x0.8 air port and rely on a spring return for fail-safe retraction.
This PSBR10X10R variant features an R axial inlet and lacks a sensor magnet. The direct M4x0.7 front-cover thread mounts flush to your tooling. Because the rod is a slender 4 mm, use an external guide for any off-axis loads.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Bolt directly through the front cover (M4×0.7)
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Match bolt size and engagement to the front thread.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R FAQ
The net push force is 29.8 N at 0.5 MPa and 45.5 N at the 0.7 MPa maximum. Because it is single-acting push, the internal return spring sets a 0.2 MPa minimum pressure before the rod moves.
The cylinder mounts directly via an M4x0.7 front-cover thread. It features a SUS316L stainless barrel for damp environments and a fixed TPU bumper to decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSBR Pen-Size Cylinders
Request a Quote for Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10R
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.