Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR
The AirTAC Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR is a single acting, push type (spring return) pen-size mini cylinder with direct front-cover mounting (M4×0.7 thread). A single air port drives the push stroke on a Ø10mm bore, 10mm stroke; the return spring resets the rod when air is released.
- BoreØ10 mm
- Stroke10 mm
- Port sizeM5×0.8
- Front-mount threadM4×0.7
- Acting typePush, single acting
- ReturnSpring
About the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR
The AirTAC PSBR10X10SR is a single-acting push pen-size mini cylinder with a 10 mm bore and 10 mm stroke. Air entering the M5x0.8 port extends the rod, while an internal spring retracts it on air release. This fail-safe design ensures the rod returns home if air pressure drops. It supplies about 29.8 N of net push at 0.5 MPa.
The slim SUS316L stainless body bolts directly to a fixture via the front-cover M4x0.7 thread, saving space in tight assemblies. A fixed TPU bumper cushions the stroke ends. The built-in magnet (-S) supports reed or electronic switches for position sensing. Plan for a safe working load of roughly 18 N, which is about 60 percent of the rated force, to account for seal friction.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR Technical Specifications
| Model | Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR |
|---|---|
| Series | PSBR JIS pen-size front-mount cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push type (spring return) |
| Front-mount thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Front cover carries the mounting thread (M4×0.7); barrel is SUS316L. Forces below are NET spring-deducted values. Confirm against the product label.
Net Push Force (Ø10mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 29.8 N |
| 0.7 MPa (max) | 45.5 N |
These are usable push forces after the return spring is subtracted, from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR
| PSBR | JIS pen-size front-mount single acting, push type (spring return) series. |
|---|---|
| 10 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| U / R | Back cover: U 90° side inlet or R axial inlet (bore-dependent). |
Mounting: direct front-cover thread (M4×0.7). Related PBR-family variants: PBR (double acting), PTBR (single-acting pull).
Where the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR Is Used
Part Ejector
Uses the spring-return push to eject small machined parts from a fixture, guaranteeing a safe retract if air fails.
Panel Pusher
Extends 10 mm to index lightweight panels on a conveyor line using the direct front-mount thread for compact spacing.
Clamp Release
Applies 29.8 N of net push at 0.5 MPa to disengage a secondary clamp, relying on the spring to clear the workspace.
Is the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR the Right Cylinder?
Selecting this 10 mm bore model gives 29.8 N net push at 0.5 MPa. If your application requires less force, the 8 mm bore version offers 18.7 N at the same pressure. For heavier tasks, the 12 mm bore provides 42.9 N. This PSBR10X10SR variant includes a built-in magnet and an R axial inlet for in-line plumbing.
The direct front-mount M4x0.7 thread eliminates separate brackets, and the spring-return mechanism ensures a fail-safe retract. Remember the thin 4 mm rod is designed for coaxial thrust, so add an external guide if you encounter off-axis loads over the 10 mm stroke.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Bolt directly through the front cover (M4×0.7)
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Match bolt size and engagement to the front thread.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR FAQ
The net push force is 29.8 N at 0.5 MPa and 45.5 N at 0.7 MPa maximum. Because it is single-acting push with a return spring, it requires a minimum pressure of 0.2 MPa before the rod moves, and it fails safe retracted on air loss.
It mounts directly via the front-cover M4x0.7 thread, separate from the M5x0.8 air port. The built-in magnet works with AirTAC reed or electronic switches, and the SUS316L stainless barrel suits damp environments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSBR Pen-Size Cylinders
Request a Quote for Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X10SR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.