Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R
The AirTAC Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R is a single acting, push type (spring return) pen-size mini cylinder with direct front-cover mounting (M4×0.7 thread). A single air port drives the push stroke on a Ø10mm bore, 60mm stroke; the return spring resets the rod when air is released.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Front-mount threadM4×0.7
- Acting typePush, single acting
- ReturnSpring
About the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R
The AirTAC PSBR10X60R is a JIS pen-size single-acting push cylinder with a 60 mm stroke. Air entering the M5x0.8 port extends the rod, while an internal spring retracts it. This fail-safe design ensures the rod returns home on air loss. It delivers 29.8 N of net push at 0.5 MPa, with the return spring force already deducted.
The body features a SUS316L stainless barrel and a direct M4x0.7 front-cover mounting thread, allowing straight attachment to your fixture. A fixed TPU bumper cushions the stroke ends. Plan for a safe working load of roughly 18 N, which is about 60 percent of the 0.5 MPa rating. This bore also lifts around 1.5 kg vertically with a 2:1 safety margin.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R Technical Specifications
| Model | Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R |
|---|---|
| Series | PSBR JIS pen-size front-mount cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 60 mm |
| Acting type | Single acting, push type (spring return) |
| Front-mount thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Front cover carries the mounting thread (M4×0.7); barrel is SUS316L. Forces below are NET spring-deducted values. Confirm against the product label.
Net Push Force (Ø10mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 29.8 N |
| 0.7 MPa (max) | 45.5 N |
These are usable push forces after the return spring is subtracted, from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R
| PSBR | JIS pen-size front-mount single acting, push type (spring return) series. |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| U / R | Back cover: U 90° side inlet or R axial inlet (bore-dependent). |
Mounting: direct front-cover thread (M4×0.7). Related PBR-family variants: PBR (double acting), PTBR (single-acting pull).
Where the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R Is Used
Short-Stroke Ejector
Pushes small machined parts out of a fixture using the direct front mount, relying on the spring to retract the 4 mm rod safely when air stops.
Panel Pusher
Extends 60 mm to press a lightweight panel into a frame. The SUS316L barrel handles damp manufacturing environments without corroding.
Clamp Release
Single-line air pressure overcomes the spring to release a holding clamp. Air loss automatically secures the clamp in the retracted position.
Is the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R the Right Cylinder?
This 10 mm bore sits between the 8 mm and 12 mm options. The smaller bore provides 18.7 N net push at 0.5 MPa, while the larger bore offers 42.9 N. Choose this model when your application requires about 18 N of actual work. The direct front mount and fail-safe retract suit tight spaces. Confirm the M4x0.7 front thread and R axial inlet fit your manifold.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Bolt directly through the front cover (M4×0.7)
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Match bolt size and engagement to the front thread.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R FAQ
It provides 29.8 N net push at 0.5 MPa and 45.5 N at 0.7 MPa. The internal return spring sets a 0.2 MPa minimum pressure before the rod moves. The spring force is already deducted from these figures.
It bolts directly via an M4x0.7 front-cover thread. The R back cover provides an axial air inlet. A fixed TPU bumper decelerates the rod at the stroke ends, but you should meter-out the exhaust or add an external shock absorber when moving real tooling mass at higher speeds.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSBR Pen-Size Cylinders
Request a Quote for Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60R
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.