Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR
The AirTAC Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR is a single acting, push type (spring return) pen-size mini cylinder with direct front-cover mounting (M4×0.7 thread). A single air port drives the push stroke on a Ø10mm bore, 60mm stroke; the return spring resets the rod when air is released.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Front-mount threadM4×0.7
- Acting typePush, single acting
- ReturnSpring
About the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR
The AirTAC PSBR10X60SR is a JIS pen-size single-acting push cylinder with a 60 mm stroke and a built-in magnet. Air entering the M5x0.8 port extends the rod, while an internal spring retracts it on air release. This fail-safe design ensures the rod returns home if pressure drops. It provides 29.8 N of net push at 0.5 MPa and 45.5 N at 0.7 MPa.
You mount it directly via the front-cover M4x0.7 thread, saving space in tight assemblies. The SUS316L stainless barrel resists corrosion in damp environments. A fixed TPU bumper cushions the stroke ends. For a 60 mm extension, plan for a safe working load of about 18 N (roughly 60% of the 0.5 MPa rating) to account for friction, and note the slim Ø4 mm rod requires an external guide for any off-axis loads.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR Technical Specifications
| Model | Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR |
|---|---|
| Series | PSBR JIS pen-size front-mount cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 60 mm |
| Acting type | Single acting, push type (spring return) |
| Front-mount thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Front cover carries the mounting thread (M4×0.7); barrel is SUS316L. Forces below are NET spring-deducted values. Confirm against the product label.
Net Push Force (Ø10mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 29.8 N |
| 0.7 MPa (max) | 45.5 N |
These are usable push forces after the return spring is subtracted, from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR
| PSBR | JIS pen-size front-mount single acting, push type (spring return) series. |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| U / R | Back cover: U 90° side inlet or R axial inlet (bore-dependent). |
Mounting: direct front-cover thread (M4×0.7). Related PBR-family variants: PBR (double acting), PTBR (single-acting pull).
Where the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR Is Used
Panel Pusher
Extends 60 mm to push lightweight panels along a guide rail, using the direct front mount to save space in compact automation cells.
Part Ejector
Uses the fail-safe spring return to retract a 29.8 N push pin after blowing a machined part off a conveyor line.
Clamp Release
Overcomes a mechanical clamp spring with 45.5 N at 0.7 MPa to release a small workpiece, returning home when air pressure drops.
Is the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR the Right Cylinder?
This 10 mm bore model reaches the 60 mm maximum single-acting stroke limit. It delivers 29.8 N net push at 0.5 MPa. If your task needs less force, the Ø8 bore offers 18.7 N at 0.5 MPa; for heavier pushing, step up to the Ø12 bore which provides 42.9 N at 0.5 MPa.
The direct front-mount M4x0.7 thread bolts straight to your fixture without extra brackets. The R axial inlet keeps plumbing in-line. The internal spring sets a 0.2 MPa minimum pressure before motion begins. The -S suffix means a piston magnet is installed for position sensing with reed or electronic switches.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Bolt directly through the front cover (M4×0.7)
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Match bolt size and engagement to the front thread.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR FAQ
The net push force is 29.8 N at 0.5 MPa and 45.5 N at the 0.7 MPa maximum. Because it is single-acting push with a return spring, it requires a minimum of 0.2 MPa to overcome the spring and move the rod.
It mounts directly via the front-cover M4x0.7 thread. The -S suffix indicates a built-in piston magnet compatible with reed or electronic switches. The SUS316L stainless barrel provides corrosion resistance for damp environments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSBR Pen-Size Cylinders
Request a Quote for Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.