Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU
The AirTAC Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU is a single acting, push type (spring return) pen-size mini cylinder with direct front-cover mounting (M4×0.7 thread). A single air port drives the push stroke on a Ø10mm bore, 60mm stroke; the return spring resets the rod when air is released.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Front-mount threadM4×0.7
- Acting typePush, single acting
- ReturnSpring
About the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU
The AirTAC PSBR10X60SU is a single-acting push pen cylinder with a 60 mm stroke. Air entering the M5x0.8 port extends the rod, while an internal spring retracts it. This fail-safe design ensures the rod returns home on air loss. It delivers 29.8 N of net push at 0.5 MPa and 45.5 N at 0.7 MPa.
The direct M4x0.7 front-cover mounting thread bolts straight to your fixture, saving space. The SUS316L stainless barrel suits damp environments. A fixed TPU bumper decelerates the rod at stroke ends. For smooth operation, plan for a safe working load of about 18 N, which lifts roughly 1.5 kg vertically.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU Technical Specifications
| Model | Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU |
|---|---|
| Series | PSBR JIS pen-size front-mount cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 60 mm |
| Acting type | Single acting, push type (spring return) |
| Front-mount thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Front cover carries the mounting thread (M4×0.7); barrel is SUS316L. Forces below are NET spring-deducted values. Confirm against the product label.
Net Push Force (Ø10mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 29.8 N |
| 0.7 MPa (max) | 45.5 N |
These are usable push forces after the return spring is subtracted, from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU
| PSBR | JIS pen-size front-mount single acting, push type (spring return) series. |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| U / R | Back cover: U 90° side inlet or R axial inlet (bore-dependent). |
Mounting: direct front-cover thread (M4×0.7). Related PBR-family variants: PBR (double acting), PTBR (single-acting pull).
Where the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU Is Used
Part Ejection
Pushes finished parts off an assembly line. The spring ensures the ejector retracts safely if air pressure drops.
Panel Pusher
Extends to move lightweight panels into a test fixture. The direct front mount keeps the footprint minimal.
Clamp Release
Extends to open a holding clamp. The fail-safe retract automatically secures the clamp when air is removed.
Is the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU the Right Cylinder?
This 10 mm bore provides 29.8 N net push at 0.5 MPa. If you need less force, the 8 mm bore yields 18.7 N; for more power, the 12 mm bore offers 42.9 N. The internal spring sets a 0.2 MPa minimum pressure before motion begins.
The direct front-mount thread simplifies installation. The built-in magnet works with reed or electronic switches. The U back cover provides a 90-degree side inlet. The thin 4 mm rod requires an external guide for off-axis loads.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Bolt directly through the front cover (M4×0.7)
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Match bolt size and engagement to the front thread.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU FAQ
The net push force is 29.8 N at 0.5 MPa and 45.5 N at 0.7 MPa. The internal return spring requires a minimum pressure of 0.2 MPa before the rod extends.
It mounts directly via an M4x0.7 thread on the front cover. The built-in magnet supports reed or electronic switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSBR Pen-Size Cylinders
Request a Quote for Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X60SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.