Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU
The AirTAC Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU is a single acting, push type (spring return) pen-size mini cylinder with direct front-cover mounting (M4×0.7 thread). A single air port drives the push stroke on a Ø8mm bore, 40mm stroke; the return spring resets the rod when air is released.
- BoreØ8 mm
- Stroke40 mm
- Port sizeM5×0.8
- Front-mount threadM4×0.7
- Acting typePush, single acting
- ReturnSpring
About the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU
The AirTAC PSBR8X40SU is a single-acting push pen cylinder that extends via one M5x0.8 air port and retracts via an internal spring. It supplies 18.7 N of net push at 0.5 MPa. The direct M4x0.7 front-cover thread bolts straight to your jig, saving space.
A built-in magnet enables position sensing with reed or electronic switches. The SUS316L stainless barrel suits damp environments. Plan for a safe working load of roughly 11 N (about 60% of the 0.5 MPa rating) to overcome seal friction and ensure smooth travel.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU Technical Specifications
| Model | Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU |
|---|---|
| Series | PSBR JIS pen-size front-mount cylinder |
| Bore size | Ø8 mm |
| Rod diameter | Ø4 mm |
| Stroke | 40 mm |
| Acting type | Single acting, push type (spring return) |
| Front-mount thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Front cover carries the mounting thread (M4×0.7); barrel is SUS316L. Forces below are NET spring-deducted values. Confirm against the product label.
Net Push Force (Ø8mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 18.7 N |
| 0.7 MPa (max) | 28.7 N |
These are usable push forces after the return spring is subtracted, from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU
| PSBR | JIS pen-size front-mount single acting, push type (spring return) series. |
|---|---|
| 8 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| U / R | Back cover: U 90° side inlet or R axial inlet (bore-dependent). |
Mounting: direct front-cover thread (M4×0.7). Related PBR-family variants: PBR (double acting), PTBR (single-acting pull).
Where the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU Is Used
Panel Pusher
Uses the direct front mount to thrust thin panels into a fixture, relying on the spring to withdraw the rod safely.
Part Ejector
Pushes light machined components off a conveyor belt with 18.7 N net force before retracting for the next cycle.
Clamp Release
Overcomes a light spring clamp to release a held part, automatically resetting to the retracted position if air pressure drops.
Is the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU the Right Cylinder?
This 8 mm bore generates 18.7 N net push at 0.5 MPa. If you need less force, the 6 mm bore provides 10.6 N; for more thrust, the 10 mm bore yields 29.8 N. All three options share the 0.2-0.7 MPa operating range.
The spring ensures the rod returns home on air loss for fail-safe retraction. Confirm the M4x0.7 front-mount thread engagement and the 90-degree side inlet plumbing for your setup.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Bolt directly through the front cover (M4×0.7)
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Match bolt size and engagement to the front thread.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU FAQ
It delivers 18.7 N net push at 0.5 MPa and 28.7 N at 0.7 MPa. Because a return spring is built in, a minimum pressure of 0.2 MPa is required before the rod moves, and the cylinder fails safe to the retracted position on air loss.
The front cover features a direct M4x0.7 mounting thread for straight fixture bolting. A fixed TPU bumper decelerates the rod at stroke end, but above mid-speed with real tooling mass you should meter-out the exhaust or add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSBR Pen-Size Cylinders
Request a Quote for Airtac PSBR Single Acting Square Head Compact Cylinder PSBR8X40SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.