Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 150mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke150 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A
The AirTAC SAIF100X150-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve. This integrated manifold block uses O10 x O6.5 PU tubing to link the valve to the PT3/8 cylinder ports, eliminating the need for remote pneumatic plumbing. Driven by an AC220V terminal entry coil consuming 3.5 VA, it achieves a rapid 0.05s activation time while delivering substantial thrust, pushing 3927N and pulling 3681N at 0.5 MPa.
Because the cylinder body rates to 1.0 MPa but the internal piloted 4M310 valve operates at 0.15-0.8 MPa, the practical working pressure for this assembled unit is 0.15-0.8 MPa. The factory default setting retracts the piston rod when the coil is energised, though you can reconfigure it to extend-when-energised by simply repositioning the valve. This self-switching design requires just one electrical signal to drive the actuator, making it highly effective for decentralized installations across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×150 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A Is Used
Decentralized Assembly Stations
Ideal for large machine layouts where running individual valve tubing back to a central manifold is inefficient, allowing local control via a single AC220V signal.
Heavy Material Handling
Provides up to 3927N of push force at 0.5 MPa for moving heavy jigs or workpieces, utilizing the built-in 4M310 valve with a 1.68 Cv flow rate for rapid actuation.
Space-Constrained Retrofitting
Perfect for upgrading older machines where panel space is at a premium, as the integrated manifold and terminal coil eliminate the need for external valve islands.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A the Right Choice?
Choose this 100mm bore when your application requires heavy thrust up to 3927N at 0.5 MPa; if you need less force, stepping down to the 80mm bore yields 2513N of push force while saving envelope space. The SAIF100X150-10A excels over a standard SAI cylinder paired with a remote valve by drastically reducing wiring, pneumatic tubing, and panel footprint. It is ideal for space-tight machinery where running separate valve lines is costly or impractical.
When ordering a replacement, verify the 100mm bore, 150mm stroke, 10 (3/8) valve port, AC220V voltage, and terminal electrical entry. The standard carbon steel rod and PT tapered threads must be matched exactly. Note that while the variable air cushions at both ends decelerate the rod near stroke end, this 5/2 valve does not lock or hold the load without live pressure; for true mechanical holding, consider the SAIL or BSAI series.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A FAQ
It delivers 3927N of push force and 3681N of pull force at 0.5 MPa. While the cylinder body rates to 1.0 MPa, the practical operating range is 0.15-0.8 MPa due to the limits of the built-in 4M310-10 valve.
Yes, the factory setting retracts the rod when the AC220V coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. It is a 5/2 valve that routes air, so it does not hold the load without live pressure.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.