Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A
The AirTAC SAIF100X175S-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve delivers a 30.0 mm2 orifice (Cv 1.68) and operates at a maximum frequency of 4 cycles per second. Equipped with a carbon steel rod and a magnet for CMSE reed or DMSE electronic sensors, it provides substantial thrust, delivering 3927N push force at 0.5 MPa and reaching 7068N at 0.9 MPa. The unit is driven by an AC220V terminal entry coil consuming 3.5 VA, featuring IP65 protection and a 0.05s activation time.
Because the cylinder rates to 1.0 MPa but the integrated valve operates from 0.15-0.8 MPa, the practical working pressure for this assembled unit is 0.15-0.8 MPa. The manifold connects the valve to the cylinder using PU tubing (O10 x O6.5). By default, the factory setting retracts the piston rod when the coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve. This self-switching design eliminates remote plumbing, saving panel space for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A Is Used
Decentralized Automation Stations
Ideal for large machines with decentralized stations, eliminating the need to run long valve tubing back to a central manifold.
High-Force Clamping
Provides up to 7068N of push force at 0.9 MPa, suitable for heavy-duty clamping and pressing tasks within space-constrained machinery.
Retrofit Upgrades
Perfect for retrofits where adding a separate remote valve is costly, as the integrated 4M310-10 valve and manifold handle switching directly on the cylinder.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A the Right Choice?
Select this 100mm bore when an application requires high thrust, such as 3927N push at 0.5 MPa, and stepping down to a 63mm bore (1559N push) would be insufficient. A self-valved SAIF beats a separate cylinder and remote valve when floor or panel space is tight, as it switches itself from one coil signal without needing long runs of tubing. This specific model uses an AC220V terminal connection with PT threaded ports. Remember that the 5/2 valve routes air and is not a lock; it will not hold the load without live pressure. For position holding, consider the SAIL lock or BSAI clamp-lock series. To replace this unit, match the 100mm bore, 175mm stroke, 1/2" cylinder port, 3/8" valve port, AC220V voltage, terminal entry, PT threads, and the -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A FAQ
The 100mm bore generates 3927N push and 3681N pull force at 0.5 MPa, reaching up to 7068N push at 0.9 MPa. The built-in 4M310-10 5/2 valve has an effective area of 30.0 mm2 (Cv 1.68) to handle the required air volume.
The built-in valve allows the cylinder to switch itself from a single AC220V coil signal, saving panel space and reducing plumbing. By default, the rod retracts when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.