Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B
The AirTAC SAIF100X175S-10B is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, delivering a Cv of 1.68 and a 30 mm2 effective orifice. Driven by a DC24V terminal coil consuming 3.0 W with an IP65 rating and a rapid 0.05 s activation time, it generates a substantial 3927 N push force at 0.5 MPa. Because the integrated valve operates at 0.15-0.8 MPa, this defines the practical working pressure range for the assembled unit, even though the bare cylinder body is rated for 1.0 MPa.
This model includes a magnet for position sensing using AirTAC CMSE reed or DMSE electronic solid-state switches. The manifold connects the valve to the cylinder via O10 x O6.5 PU tubing, and the valve port (3/8") differs from the cylinder port (1/2"). By default, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised simply by repositioning the valve. It eliminates the need for a separate remote valve, significantly reducing tubing and panel space for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B Is Used
Decentralized Automation Stations
Ideal for large-scale production lines where installing individual remote valves is impractical, allowing each cylinder to switch itself via a single DC24V signal.
Heavy Clamping Fixtures
Provides robust 3927 N push force at 0.5 MPa for securing heavy workpieces, using the built-in 4M310-10 valve to minimize overall fixture footprint.
Retrofit Space-Tight Machines
Perfect for upgrading older equipment where panel space is limited, eliminating the need to route long tubing runs back to a central valve bank.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B the Right Choice?
Choose this 100 mm bore when high thrust is required; if you need less force, stepping down to the 80 mm bore yields 2513 N push at 0.5 MPa, which may better suit lighter loads. The SAIF100X175S-10B is ideal for space-tight machines where running separate valve tubing is costly, as one DC24V coil signal drives the cylinder directly. Remember that the 5/2 valve routes air but does not hold the load without live pressure; for true mechanical locking, consider the SAIL series instead. When ordering a replacement, verify the 175 mm stroke, 3/8" valve port, DC24V terminal coil, PT thread, and the -S magnet requirement.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B FAQ
At a practical operating pressure of 0.5 MPa, this 100 mm bore cylinder generates a push force of 3927 N and a pull force of 3681 N. The maximum thrust reaches 801 kgf at 1.0 MPa, though the integrated valve limits the working range to 0.15-0.8 MPa.
No separate remote valve is needed. The unit integrates a 4M310-10 5/2 solenoid valve with a Cv of 1.68, operating on DC24V. By factory default, energising the coil retracts the piston rod, but you can reposition the valve to make it extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X175S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.