Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 200mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke200 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A
The AirTAC SAIF100X200-10A is a double-acting ISO 15552 profile cylinder engineered with a built-in 4M310-10 5/2 solenoid valve, delivering a robust 3927N push force at 0.5 MPa. Driven by an AC220V terminal coil drawing 3.5 VA, it achieves a rapid 0.05s activation time while maintaining an IP65 rating. The integrated valve boasts a 30.0mm2 orifice (Cv 1.68) and operates at 4 cycles per second, ensuring high-flow switching directly at the actuator.
Because the 4M310 valve operates within a 0.15-0.8 MPa range, this defines the practical working pressure for the assembled SAIF unit, even though the bare cylinder rates to 1.0 MPa. The manifold connects to the cylinder using PU tubing (O10 x O6.5), while the valve features a PT3/8 port. By default, the factory setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend-when-energised if your logic requires it.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×200 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A Is Used
Decentralized Assembly Lines
Eliminates the need for long air tubes back to a central control panel by switching locally via the AC220V coil, saving wiring and plumbing space.
Heavy Clamping Fixtures
Provides 3927N of push force at 0.5MPa directly at the workpiece, with the 4M310 valve handling high flow rates for rapid actuation.
Machine Retrofits
Ideal for upgrading existing equipment where routing new valve tubing is costly, offering a self-contained ISO 15552 motion solution.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A the Right Choice?
Select this 100mm bore when your application demands high thrust (up to 3927N push at 0.5MPa, or 5497N at 0.7MPa) and you want to eliminate remote valve plumbing. Stepping down to an 80mm bore reduces the push force to 2513N at 0.5MPa, so only downsize if your load allows. The self-valved architecture is ideal for decentralized stations across large machines, saving panel space and tubing runs. When ordering a replacement, verify the 200mm stroke, PT3/8 valve port, AC220V terminal coil, PT thread, and the absence of a magnet (-S). For strokes of 300mm or more, ensure external guide rails are used to prevent excessive side loading on the rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A FAQ
At an operating pressure of 0.5 MPa, the 100mm bore provides a push force of 3927N and a pull force of 3681N. The practical operating pressure for the assembled valved unit is 0.15-0.8 MPa.
No, the 4M310-10 is an internally piloted 5/2 solenoid valve that switches itself from a single AC220V coil signal. By factory default, the rod retracts when energised, but it can be reconfigured to extend when energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.