Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 200mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke200 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B
The AirTAC SAIF100X200-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve delivers a 30.0 mm2 orifice (Cv 1.68) and operates via a DC24V terminal coil drawing 3.0 W. Because the valve limits the cylinder, the practical working pressure is 0.15-0.8 MPa, generating up to 3927N push force at 0.5 MPa.
By default, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. The manifold connects using O10 x O6.5 PU tubing, and the valve port code 10 (3/8") is distinct from the cylinder's PT1/2" port. Running at a max frequency of 4 cycles/sec, it eliminates remote valves for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×200 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B Is Used
Decentralized Automation
Ideal for large factory layouts where running remote valve tubing is costly, letting each 100mm station switch itself via a single DC24V signal.
High-Force Clamping
Delivers 3927N push force at 0.5 MPa directly at the workpiece without needing external valve manifolds or extensive pneumatic plumbing.
Retrofit Upgrades
Drops into existing ISO 15552 interchangeable footprints to upgrade older lines with self-contained valve control and 3.0W DC power.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B the Right Choice?
Choose this 100mm bore when 80mm is insufficient; the 80mm bore provides 2513N push at 0.5 MPa, whereas this SAIF100X200-10B yields 3927N at the same pressure. The self-valved design beats a separate cylinder plus remote valve by cutting panel space, tubing, and wiring. To replace this unit, match the 100mm bore, 200mm stroke, 3/8" valve port, DC24V terminal coil, PT threads, and no magnet. For load-holding, note that the 5/2 valve routes air but does not lock; use a SAIL cylinder for pneumatic locking.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B FAQ
The 100mm bore generates 3927N push and 3681N pull force at 0.5 MPa. The built-in 4M310-10 5/2 valve provides a 30.0 mm2 effective area (Cv 1.68) with a max frequency of 4 cycles/sec.
The 5/2 valve routes air but does not lock or hold the load without live pressure; for locking, use a SAIL cylinder. By factory default, the rod retracts when the DC24V coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X200-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.