Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 225mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke225 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B
The AirTAC SAIF100X225-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve provides an effective flow area of 30.0 mm2 (Cv 1.68) and operates at 4 cycles per second. Equipped with a DC24V terminal coil consuming 3.0 W, it activates in 0.05 seconds or less. While the cylinder body rates to 1.0 MPa, the integrated valve limits the practical operating pressure to 0.15-0.8 MPa. Delivering 3927 N of push force at 0.5 MPa, it handles heavy loads without needing a separate remote valve.
By routing air directly through a manifold block and O10 x O6.5 PU tubing, it eliminates complex plumbing and saves panel space, making it ideal for decentralized machine stations. The factory setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend-when-energised. The 3/8 inch valve port and PT 1/2 inch cylinder port are distinct, ensuring robust airflow for this 100 mm bore unit.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×225 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B Is Used
Decentralized Automation
Ideal for large machines with multiple stations, eliminating long air lines by mounting the valve directly on the cylinder.
Heavy Material Handling
Provides up to 3927 N of push force at 0.5 MPa for moving heavy workpieces or actuating large clamps.
Space-Constrained Retrofitting
Perfect for upgrading existing ISO 15552 setups where adding external valve islands or tubing is physically impossible.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B the Right Choice?
Choose this 100 mm bore when you need maximum thrust, as stepping down to an 80 mm bore drops your push force at 0.5 MPa to 2513 N. The 225 mm stroke is well within the 1500 mm standard maximum, but at this length you should account for potential side-loading and use a guide to prevent rod deflection. A self-valved SAIF unit beats a separate cylinder and remote valve when wiring and space are tight, as it switches itself from one DC24V coil signal.
Remember that the 5/2 valve routes air but does not lock the load; if you need true position holding without live pressure, consider the SAIL lock series. For exact replacements, match the 100 mm bore, 225 mm stroke, 10 (3/8 inch) valve port, DC24V voltage, terminal entry, PT thread, and standard carbon steel rod. Since no magnet is specified, adding an -S suffix is required if you plan to use CMSE reed or DMSE electronic sensors.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B FAQ
At 0.5 MPa operating pressure, this 100 mm bore cylinder delivers 3927 N of push force and 3681 N of pull force. It can reach a maximum push force of 801 kgf at 1.0 MPa.
No, the 4M310-10 5/2 solenoid valve routes air but does not lock the piston. The factory setting retracts the rod when the DC24V coil is energised, but it cannot hold a load without live pressure.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X225-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.