Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 350mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke350 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A
The AirTAC SAIF100X350-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve. This integrated manifold design eliminates the need for a remote valve station, using a PU tube (O10 x O6.5) to bridge the valve and cylinder locally. Driven by an AC220V terminal entry coil (3.5 VA, IP65, 0.05s response), it delivers a robust 3927N push force at 0.5 MPa. While the bare cylinder rates to 1.0 MPa, the practical operating range for this valved unit is 0.15-0.8 MPa.
By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. The 4M310-10 valve provides a 30.0 mm2 effective area (Cv 1.68) and handles up to 4 cycles per second. The cylinder features a 3/8 port, whereas the valve port is 3/8, and the assembly includes adjustable air cushions at both ends to decelerate the rod near stroke extremes.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×350 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A Is Used
Decentralized Automation
Ideal for large factory layouts where running individual valve tubing back to a main panel is costly, this self-valved cylinder operates independently from a single AC220V signal.
Heavy Material Handling
Delivers 3927N of push force at 0.5 MPa for moving heavy workpieces, with built-in air cushions to manage the kinetic energy of the 350mm stroke.
Space-Constrained Machinery
The integrated 4M310-10 valve manifold eliminates the need for a separate valve block, saving valuable envelope space in compact machine cells.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A the Right Choice?
Choose this 100mm bore when you need heavy thrust (3927N push at 0.5 MPa) and prefer a self-contained actuator over routing long pneumatic lines to a centralized valve manifold. If your application requires less force, the 80mm bore neighbour offers 2513N push at 0.5 MPa. Because the stroke is 350mm, you must account for potential side-loading and use an external guide to prevent rod damage and premature seal wear.
This SAIF unit switches itself from a single coil signal, saving panel space and tubing in decentralized machine layouts. Remember that the 5/2 valve routes air but does not lock the load mechanically; if you need true position holding without live pressure, consider the SAIL lock cylinder instead. To replace this model exactly, match the 100mm bore, 350mm stroke, 4M310-10 valve, AC220V voltage, terminal entry, PT thread, and no magnet (-S).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A FAQ
The 100mm bore generates 3927N push and 3681N pull force at 0.5 MPa. The built-in 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68) and supports up to 4 cycles per second.
The integrated 5/2 solenoid valve allows the cylinder to switch itself without a remote valve. The factory setting retracts the rod when the AC220V coil is energised, but you can reposition the valve to extend-when-energised. Note that it operates at 0.15-0.8 MPa and does not hold the load without live pressure.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.