Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 350mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke350 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B
The AirTAC SAIF100X350-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve provides a Cv of 1.68 and routes air directly through a manifold block using O10 x O6.5 PU tubing, eliminating the need for separate remote plumbing. Equipped with a DC24V terminal electrical entry consuming 3.0 W, the coil offers IP65 protection and a 0.05 s response time. Because the 4M310 valve operates at 0.15-0.8 MPa, the practical working pressure for this assembled SAIF unit is 0.15-0.8 MPa, even though the bare cylinder body rates to 1.0 MPa.
In this factory default configuration, the piston rod retracts when the coil is energised, but you can reposition the valve to achieve extend-when-energised operation if your sequence requires it. The 100mm bore generates substantial thrust, yielding 3927 N of push force and 3681 N of pull force at 0.5 MPa. This self-switching design receives a single coil signal to drive motion, making it highly effective for decentralized stations across large machines where saving panel space and minimizing tubing runs are critical.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×350 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B Is Used
Decentralized Assembly Lines
Perfect for large manufacturing systems where running individual valve tubing back to a central panel is costly and space-prohibitive.
High-Force Material Handling
Delivers up to 3927 N of push force at 0.5 MPa to move heavy pallets or actuate large mechanical clamps directly at the workstation.
Machine Retrofitting
Ideal for upgrading existing ISO 15552 compatible machinery by adding self-switching logic without redesigning the control cabinet.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B the Right Choice?
Select this 100mm bore model when an application demands high force that smaller bores cannot provide; stepping down to an 80mm bore would reduce your push force at 0.5 MPa to 2513 N. The SAIF100X350-10B is ideal when a self-valved cylinder outperforms a separate cylinder and remote valve, as it drastically reduces wiring and plumbing complexity in decentralized layouts. It features a PT tapered port thread, a 1/2 inch cylinder port, and a 3/8 inch valve port. Note that the 5/2 valve routes air but does not lock the load; if you need true position holding without live pressure, consider the SAIL lock or BSAI clamp-lock series instead. Because the 350mm stroke exceeds 300mm, ensure you provide adequate guidance to prevent excessive side-loading on the rod. To replace this unit, match the 100mm bore, 350mm stroke, 3/8 inch valve port, DC24V voltage, terminal entry, PT thread, and standard carbon steel rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B FAQ
The 100mm bore generates 3927 N push and 3681 N pull force at 0.5 MPa. The built-in 4M310-10 valve has a 30.0 mm2 orifice with a Cv of 1.68, supporting a maximum no-load frequency of 4 cycles per second.
The built-in 5/2 valve allows the cylinder to switch itself from a single DC24V coil signal, saving panel space and tubing for decentralized installations. Factory-set to retract when energised, the valve can be repositioned to extend-when-energised if needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X350-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.