Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 500mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke500 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A
The AirTAC SAIF100X500S-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, delivering a high Cv of 1.68. Driven by an AC220V terminal-entry coil that consumes 3.5 VA and responds in 0.05s, it delivers robust thrust up to 3927N at 0.5 MPa. While the bare cylinder rates to 1.0 MPa, the integrated valve limits the practical working pressure to 0.15-0.8 MPa.
This unit eliminates remote plumbing by switching itself from one coil signal, saving panel space in decentralized stations. The manifold connects via PU tubing (O10xO6.5) to the cylinder's PT3/8 ports, while the valve features a PT3/8 port. Factory-set to retract when energised, the valve can be repositioned to extend on signal. It includes a magnet for CMSE and DMSE sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×500 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A Is Used
Decentralized Automation
Ideal for large machines where running air lines to a central valve bank is costly; this cylinder controls its own actuation locally.
Heavy Material Handling
The 100mm bore provides 3927N push force at 0.5 MPa, suitable for moving heavy pallets or workpieces directly on the line.
Retrofit and Upgrades
Perfect for upgrading existing ISO 15552 lines where adding a separate valve manifold is physically constrained, offering a clean bolt-on solution.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A the Right Choice?
Choose this 100mm bore when 80mm (2513N push at 0.5 MPa) lacks force. The self-valved design beats a separate cylinder plus remote valve by cutting tubing and wiring, ideal for decentralized layouts. Remember, the 5/2 valve routes air but does not lock loads; use SAIL for holding. For stroke >= 300mm, add a guide to prevent side-load wear.
Replacement requires matching the 500mm stroke, PT3/8 valve port, AC220V terminal coil, PT thread, and -S magnet. Speed ranges from 30-800 mm/s.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A FAQ
The 100mm bore generates a push force of 3927N and a pull force of 3681N at 0.5 MPa. The maximum push force reaches 7068N at 0.9 MPa.
No, the 5/2 valve routes air but does not lock the load. The factory setting retracts the rod when the AC220V coil is energised, but it can be repositioned to extend on signal. For true load holding, consider the SAIL series.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X500S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.