Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 600mm stroke and a built-in 4M310-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke600 mm
- Built-in valve4M310-08
- Valve port1/4"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B
The AirTAC SAIF100X600-08B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-08 5/2 solenoid valve. Driven by a DC24V terminal coil drawing 3.0 W with an IP65 rating and 0.05 s response, it delivers a robust 3927N push force at 0.5 MPa. The built-in valve provides an effective flow area of 25.0 mm2 (Cv 1.40) and cycles up to 4 times per second.
Because the cylinder body rates to 1.0 MPa but the 4M310 valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. The manifold links the valve to the cylinder using O10 x O6.5 PU tubing. Factory-set to retract the rod when energized, the valve can be repositioned to extend-when-energized, enabling fully decentralized control without remote plumbing.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-08 (5/2) |
|---|---|
| Valve flow | 25.0 mm² (Cv 1.40) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×600 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M310-08. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B Is Used
Decentralized Heavy Lifting
Ideal for large-scale machinery where routing air to a remote valve is costly. The integrated DC24V valve drives the 3927N cylinder directly at the station.
Automated Material Handling
Handles heavy workpieces over a 600mm stroke. The built-in 4M310 valve ensures rapid 0.05s switching without needing a separate control panel.
Retrofit and Upgrades
Perfect for upgrading existing ISO 15552 setups. The PT-threaded terminal coil and self-contained valve manifold simplify electrical and air connections.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B the Right Choice?
Choose this self-valved unit when a large-bore actuator must operate independently in a decentralized station, eliminating the tubing and panel space required by a remote valve. If 3927N at 0.5 MPa is excessive, stepping down to the 80mm bore yields 2513N; if more force is needed, verify your air supply can sustain the volume. This specific SKU uses a DC24V terminal electrical entry with PT threads and no sensor magnet.
At 600mm stroke, ensure adequate side-load guidance to prevent rod binding, as the air cushions (36mm stroke) only decelerate near the ends. The 5/2 valve routes air but does not lock the load—add an external holding mechanism if position retention is required when pressure drops. For exact drop-in replacement, match the 100mm bore, 600mm stroke, 1/2-inch cylinder port, 1/4-inch valve port, DC24V voltage, terminal entry, PT threads, and no magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B FAQ
At 0.5 MPa, this 100mm bore cylinder provides a push force of 3927N and a pull force of 3681N. The built-in 4M310-08 5/2 valve has an effective area of 25.0 mm2 (Cv 1.40).
No. The SAIF100X600-08B has a built-in 4M310 valve actuated by a DC24V terminal coil. By default, it retracts the rod when energized, but it can be reconfigured to extend-when-energized by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.