Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A
The AirTAC SAIF100X600-10A is a double-acting ISO 15552 profile cylinder featuring a built-in 4M310-10 5/2 solenoid valve. With an effective flow of Cv 1.68 and a 30 mm2 orifice, the integrated valve manifold feeds the 100mm bore via PU tubing (O10 x O6.5). Driven by an AC220V terminal-entry coil drawing 3.5 VA, it activates in 0.05 s. The bare cylinder rates to 1.0 MPa, but the practical SAIF working range is 0.15-0.8 MPa due to the valve's operating limits. At 0.5 MPa it delivers 3927 N of push force, scaling to 5497 N at 0.7 MPa.
This self-switching unit eliminates remote plumbing, saving panel space for decentralized machine stations. The factory setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend-when-energised. The 5/2 valve holds its position via internal pilot pressure, not a spring. Note the distinct porting: the valve has a 1/2 PT thread, while the cylinder port is 3/8.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A Is Used
Decentralized Heavy Pushing
Ideal for large machines needing high force (up to 5497 N at 0.7 MPa) at isolated stations, eliminating long valve tubing runs.
Long-Stroke Material Handling
The 600mm stroke with built-in 4M310 valve provides reliable actuation for moving bulky parts along an assembly line.
Space-Constrained Retrofits
Bundles a 100mm bore cylinder and Cv 1.68 valve into one unit, drastically reducing panel space and plumbing in upgrades.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A the Right Choice?
Choose this 100mm bore when 80mm (2513 N push at 0.5 MPa) is insufficient for heavy loads. The self-valved SAIF100X600-10A outperforms a separate cylinder and remote valve by cutting tubing complexity and wiring, ideal for decentralized stations across large machines. Specify AC220V terminal power, a 1/2 valve port, and the 3/8 cylinder port. Without a magnet (-S), it lacks CMSE or DMSE sensor tracking. For exact replacements, match the 600mm stroke, 4M310-10 valve, AC220V terminal coil, PT threads, and carbon steel rod.
Because the 600mm stroke exceeds 300mm, use a guide to prevent side-load damage to the carbon steel rod and seals. The air cushion decelerates near stroke ends, but the 5/2 valve does not lock or hold the load without live pressure; for true position holding, select an AirTAC SAIL or BSAI clamp-lock cylinder.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A FAQ
The 100mm bore generates 3927 N push force at 0.5 MPa and 5497 N at 0.7 MPa. The built-in 4M310-10 valve has an effective area of 30 mm2 (Cv 1.68) and a max frequency of 4 cycles/sec.
No separate valve is needed. The AC220V terminal coil drives the 5/2 valve directly. By default, energising the coil retracts the rod, but you can reposition the valve to extend-when-energised. The valve holds position via pilot pressure, not a spring.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.