Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B
The AirTAC SAIF100X600S-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific SKU is configured with a PT3/8 valve port, a DC24V terminal electrical entry drawing 3.0 W, and a -S magnet for CMSE reed or DMSE electronic sensors. The built-in valve provides a 30.0 mm2 effective orifice (Cv 1.68) and switches at up to 4 cycles per second. Because the 4M310 valve operates at 0.15-0.8 MPa, the practical working pressure for this assembled unit is 0.15-0.8 MPa, even though the bare cylinder body rates to 1.0 MPa.
Driving a robust 100mm bore, it generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. The unit eliminates the need for a separate remote valve, using a manifold block and O10 x O6.5 PU tubing to route air internally. This decentralized setup saves panel space and wiring. Factory-set to retract the piston rod when the coil is energised, the valve can be repositioned on the manifold to extend-when-energised if your machine logic requires it.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B Is Used
Decentralized Heavy Lifting
Ideal for large assembly lines where running dedicated valve lines is costly. The integrated 4M310 valve handles the heavy 3927 N push force locally from a single DC24V signal.
Automated Pressing Stations
Provides reliable 600mm stroke pressing action. The built-in valve responds in 0.05 s, and the -S magnet allows precise DMSE electronic position tracking.
Machine Retrofitting
Drops into existing ISO 15552 mounts to upgrade a standard cylinder to a self-switching unit. Eliminates the need to plumb a remote 3/8 valve, saving space.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B the Right Choice?
Select this 100mm bore when you need heavy thrust (up to 3927 N at 0.5 MPa) in a decentralized layout where running individual valve tubing back to a main manifold is impractical. If your application requires less force, stepping down to an 80mm bore yields 2513 N of push at 0.5 MPa and uses a smaller footprint. For this 600mm stroke, ensure adequate side-load guidance to prevent rod bending, as the air cushion (36mm stroke) only decelerates near the end of travel and does not hold the load without live pressure.
To match this exact replacement, verify the 100mm bore, 600mm stroke, PT3/8 valve port, DC24V terminal coil, PT port threads, and the -S magnet requirement. The 5/2 valve routes air to hold position via pilot pressure, not a mechanical lock; for true load-holding under pressure loss, consider an AirTAC SAIL lock cylinder.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B FAQ
At 0.5 MPa, this 100mm bore cylinder outputs 3927 N of push force and 3681 N of pull force. The integrated 4M310-10 5/2 valve has a 30.0 mm2 effective orifice (Cv 1.68) to handle the required air volume.
Yes. The factory default retracts the rod when the DC24V coil is energised, but you can reposition the 4M310 valve on the manifold block to extend-when-energised. This eliminates the need for a separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X600S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.