Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B
The AirTAC SAIF100X700S-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific build delivers a robust 3927N push force at 0.5 MPa and utilizes a Cv 1.68 flow capacity to drive the large 100mm bore efficiently. Equipped with a DC24V terminal coil drawing 3.0 W, it activates in 0.05 seconds. The assembled unit operates safely within the 0.15-0.8 MPa pressure range dictated by the built-in valve, despite the cylinder body rating of 1.0 MPa.
By mounting the valve directly via a manifold block and O10 x O6.5 PU tubing, this model eliminates remote plumbing and saves panel space for decentralized machine stations. The factory setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend-when-energised. A magnet option (-S) is included for CMSE reed and DMSE solid-state sensors, and the carbon steel rod handles heavy loads.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B Is Used
Decentralized Assembly Stations
Eliminates the need for long air lines back to a central manifold, driving heavy 100mm bore actuators directly from a local DC24V signal.
Heavy Material Handling
Provides 3927N of push force at 0.5 MPa for lifting and positioning heavy workpieces, while the 4M310 valve ensures rapid response.
Retrofit Automation
Ideal for upgrading older machines where routing new valve tubing is costly; the self-valved cylinder requires only a single electrical connection.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B the Right Choice?
Choose this 100mm bore when the 80mm neighbour (providing 2513N push at 0.5 MPa) lacks sufficient thrust for heavy-duty lifting. The integrated 4M310-10 valve handles up to 4 cycles per second, making it ideal for high-flow applications. Because the 5/2 valve routes air without mechanical locking, use a SAIL lock cylinder if you need true load holding during air loss. At 700mm stroke, this cylinder requires external guide support to prevent rod side-loading and premature seal wear.
To replace this unit, match the 100mm bore, 700mm stroke, PT3/8 cylinder port, 10 (3/8") valve port, DC24V voltage, terminal entry, PT thread, and the -S magnet. The terminal connection accepts DC24V power at 3.0W with IP65 protection, simplifying wiring in space-tight retrofits.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B FAQ
It delivers 3927N push and 3681N pull force at 0.5 MPa. The built-in 4M310-10 valve provides a 30.0 mm2 orifice with a Cv of 1.68.
The 5/2 valve is factory set to retract the rod when the DC24V coil energizes, but can be reconfigured to extend-when-energised. It routes air and does not mechanically hold the load; use a SAIL lock cylinder for position holding.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X700S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.