Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 160mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke160 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A
The AirTAC SAIF32X160-06A is a double-acting ISO 15552 profile cylinder that integrates a 4M210-06 5/2 solenoid valve directly onto its body. Driven by an AC220V terminal coil drawing 3.5 VA, it delivers a push force of 402N at 0.5 MPa. While the bare cylinder rates to 1.0 MPa, the integrated valve limits the practical working range to 0.15-0.8 MPa. The assembly switches itself from one electrical signal, eliminating remote plumbing.
From the factory, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if needed. The manifold links the valve to the cylinder using O8xO5 PU tubing. Note that the valve port is 1/8 (code 06) while the cylinder port is also 1/8, and the standard carbon steel rod uses an M10x1.25 thread.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×160 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A Is Used
Decentralized Stations
Perfect for large machines with multiple nodes, eliminating long tubing runs by switching locally via the AC220V terminal signal.
Compact Clamping
Provides 402N of push force for small part clamping in tight machinery envelopes where a separate valve would not fit.
Retrofit Automation
Ideal for upgrading existing lines where adding a centralized valve island is cost-prohibitive or physically impossible.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A the Right Choice?
Choose this 32mm bore when you need compact actuation up to 402N push force at 0.5 MPa; step up to a 40mm bore if your application requires 628N. The self-valved SAIF design is ideal for decentralized stations where running separate valve tubing and wiring would consume excessive panel space. This specific SKU uses an AC220V terminal connection with PT threaded ports.
The built-in 5/2 valve routes air but does not lock the load mechanically—consider a SAIL lock cylinder if position holding without live pressure is required. For this 160mm stroke, ensure adequate side-load guidance to prevent rod binding. Replacement match: 32mm bore, 160mm stroke, 06 valve port, AC220V, terminal entry, PT thread, no magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A FAQ
At 0.5 MPa, this 32mm bore cylinder provides a push force of 402N and a pull force of 345N. The integrated 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and operates at a maximum frequency of 5 cycles per second.
No, the SAIF32X160-06A has a built-in 4M210 5/2 valve. It operates directly from an AC220V signal. By factory default, the rod retracts when the coil is energised, but the valve can be repositioned to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X160-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.