Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 160mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke160 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F
The AirTAC SAIF32X160S-06F is a double-acting ISO 15552 profile cylinder fitted with a built-in 4M210-06 5/2 solenoid valve. This specific SKU features a PT1/8 valve port, a DC12V terminal electrical entry drawing 3.0 W, and a -S magnet for CMSE reed and DMSE electronic sensors. Because the manifold links the valve to the cylinder via O8xO5 PU tubing, it eliminates remote plumbing and is ideal for decentralized machine stations.
While the bare cylinder rates to 1.0 MPa, the integrated valve limits the practical SAIF operating pressure to 0.15-0.8 MPa. The 32mm bore delivers 402N push force at 0.5 MPa. By default, the rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if your sequence requires it.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×160 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F Is Used
Decentralized Stations
Perfect for large machines with multiple nodes, using one DC12V signal to actuate the cylinder locally without a central valve bank.
Compact Assembly Lines
Saves valuable panel and footprint space by mounting the 4M210 valve directly to the profile cylinder via a manifold block.
Retrofits & Upgrades
Ideal for upgrading existing ISO 15552 setups where running new valve tubing is costly or physically constrained.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F the Right Choice?
Choose this self-valved SAIF unit when you need to cut panel space and wiring across multiple decentralized stations, rather than running long air lines to a remote valve bank. If your application requires greater thrust, stepping up to the 40mm bore yields 628N push force at 0.5 MPa. Conversely, if you only need position holding rather than continuous cycling, note that the 5/2 valve routes air but does not lock the load; for true mechanical holding, consider the SAIL lock or BSAI clamp-lock series.
When ordering a replacement, verify the 32mm bore, 160mm stroke, 1/8 cylinder port, 4M210-06 valve with 1/8 PT threads, DC12V terminal coil, and the -S magnet option. For this 160mm stroke, ensure your guiding mechanism handles any side-load to prevent premature seal wear.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F FAQ
The 32mm bore generates 402N push and 345N pull force at 0.5 MPa. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and operates at a maximum frequency of 5 cycles per second.
No, the SAIF series integrates the 5/2 valve directly onto the cylinder. By default, the rod retracts when the DC12V coil is energised, but the valve can be repositioned to extend-when-energised. This allows the unit to control itself with a single electrical signal.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.