Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25
The AirTAC Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25 is a genuine double-acting MULTI-POSITION (tandem) air cylinder: two piston sections of 150mm and 25mm give 4 controllable stop positions across a 175mm total travel, with a Ø80mm bore, PT3/8 ports and adjustable end cushioning.
- BoreØ80 mm
- Stroke 1150 mm
- Stroke 225 mm
- Total travel175 mm
- Positions4 stops
- Port sizePT3/8
About the Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25
The SCT80X150X25 is a double-acting, multi-position pneumatic cylinder that provides four distinct, repeatable rod positions: 0 mm (fully retracted), 25 mm, 150 mm, and 175 mm (total travel). Each piston section independently generates 2513 N of push force at 0.5 MPa, making it ideal for applications requiring two different intermediate stops without complex controls.
Built on an 80 mm bore with a 25 mm diameter rod and PT3/8 ports, this tie-rod cylinder features a 28 mm adjustable air cushion for smooth end-of-stroke deceleration. The body length A(SCT) is 296 mm. At the maximum operating pressure of 0.9 MPa, a single section delivers 4523 N of thrust.
Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25 Technical Specifications
| Model | Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25 |
|---|---|
| Series | SCT multi-position tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke 1 / Stroke 2 | 150 / 25 mm |
| Total travel | 175 mm |
| Stop positions | 4 positions |
| Acting type | Double acting (tandem, multi-position) |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke / section | Up to 500 mm standard |
Specifications follow the official AirTAC SCT (multi-position) datasheet. SCT is available in bores 32–100; each of the two sections has a 500 mm max standard stroke (800 mm max). Confirm against the product label before installation. Thread options: PT (standard) / G.
Stop Positions (4)
| Position | Rod extension |
|---|---|
| P0 (retracted) | 0 mm |
| P1 (section 1) | 150 mm |
| P2 (section 2) | 25 mm |
| P3 (both extended) | 175 mm |
Positions are set by pressurising section 1, section 2, or both. With equal strokes you get 3 distinct positions; with unequal strokes you get 4.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force is per actuated piston section (single-piston, same as the SC bore): push uses the full bore area, pull subtracts the rod area. Size with a safety margin.
Model Code: Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25
| SCT | Multi-position (tandem) tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm (SCT range 32–100). |
| ×150 | Stroke 1 (section 1) in mm. |
| ×25 | Stroke 2 (section 2) in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCD (double rod), SCJ (adjustable stroke). SCT mounting: Basic, FA, FB, CA, CB, LB. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25 Is Used
Two-Stage Clamping
Executes a low-force 25 mm pre-clamp followed by a full 150 mm power stroke, protecting delicate parts before final fixturing.
Diverter Gate Actuation
Positions a gate at 25 mm for one lane and 150 mm for another, reliably sorting packages on a conveyor line.
Selective Depth Pressing
Drives a tool to a 25 mm marking depth or a 150 mm forming depth, enabling two operations from one pneumatic station.
Is the Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25 the Right Cylinder?
Choose the SCT80X150X25 when a process requires two distinct forward positions—such as a shallow 25 mm engagement and a deeper 150 mm push—from a single, compact actuator. This tandem unit replaces the need for two separate cylinders with external stops, saving space and simplifying pneumatic circuitry. If a higher force per section is needed, the SCT100 series provides 3927 N of push at 0.5 MPa. For replacement, match the 80 mm bore, both the 150 mm and 25 mm strokes, PT thread, and basic mounting configuration.
Multi-position checklist
- ✓ Need 4 repeatable stops?
- ✓ Section strokes 150 + 25 mm suit your layout?
- ✓ Required force at your working pressure
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Plumb the two sections to the correct valves for each stop.
- check Adjust end cushion screws for smooth stops.
- check Use SCT mounting accessory (FA / FB / CA / CB / LB).
- check Installation by qualified personnel per AirTAC docs.
Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25 FAQ
It has four discrete mechanical stops: 0 mm (retracted), 25 mm, 150 mm, and 175 mm (fully extended). These are achieved by pressurizing the first section, the second section, or both simultaneously.
Yes, if your application requires strokes of 25 mm and 150 mm from the same rod axis. The SCT80X150X25 consolidates both movements into one tie-rod body, eliminating the need for dual mounting brackets and flow controls.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCT Multi-Position Cylinders
Request a Quote for Airtac SCT80~100 Multi-Position Tandem Cylinder SCT80X150X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.