The AirTAC Airtac TR Twin-Rod Cylinders TR10X30S is a genuine TR twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range. As the JIS guide-grade series it adds high non-rotating precision, a lengthening sliding guide (no added lubricant) and two-side ports.
A twin-rod cylinder uses two parallel rods on a shared plate to resist bending and twisting so the load moves without rotating. This TR10X30S gives a 10 mm bore with a 30 mm stroke, producing 78.5 N of push thrust at 0.5 MPa, and uses an external bumper that cushions impact and trims the effective stroke by up to 5 mm.
This is a genuine AirTAC part built to JIS standard with a precise lengthening sliding guide for higher non-rotating accuracy and low rod-end deflection. A magnet is standard on every unit with switch slots around the body; we confirm dimensions and sizing from the datasheet on request.
| Model | Airtac TR Twin-Rod Cylinders TR10X30S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TR (JIS standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT, G or NPT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
For a 10 mm bore the thrust at 0.5 MPa is 78.5 N push (pull is lower), so pick the bore that meets your force need. TR is the JIS-standard precise-guide twin-rod series with higher non-rotating accuracy and two groups of ports on both sides, versus the enterprise-standard TN which is PT only. Stroke 30 mm sits within the bore 10 range; keep strokes moderate to avoid over-long rod deflection on the short cover. Thread is PT (TR also offers G and NPT). We can help confirm allowable side-load from the performance curves.
Pushes small electronic parts onto a test fixture without rotation so each part lands square against the locator every cycle.
Halts workpieces on a conveyor belt; the twin rods keep the stopper face flat and square against the load to prevent skewing.
Clamps a workpiece from the side; the anti-rotation twin-rod design holds the clamp steady and parallel under load.
At 0.5 MPa the 10 mm bore twin-rod gives 78.5 N push (pull is lower). Operating pressure for bore 10 is 0.2-1.0 MPa (29-145 psi).
It is an external front bumper, not an air cushion. It both cushions impact and adjusts the effective stroke over a -5 to 0 mm range. For allowable side-load and overall dimensions we confirm from the datasheet on request.