Airtac 2WX Fluid Solenoid Valve 2WX03008EI
2. Wide pressure range adaptability with selectable variants: Ultra-high pressure (X), High pressure (H), Standard, High flow (L), and Extra-high flow (T);
3. Compact design with minimal footprint, lightweight construction, and simplified installation/maintenance;
4. Brass valve body with B-class thermal-rated coils. Standard FPMF (Fluorine Rubber) seals ensure multi-media compatibility. Custom seal materials available upon request – consult our technical department;
5. IP65-rated coil protection. Electrical connection options: Direct lead wire or DIN connector.
Category: Fluid Solenoid Valves | Brand: Airtac | Series: 2WX
AirTAC 2WX03008EI Fluid Solenoid Valve Specifications
- Model: 2WX03008EI
- Type: 2-position, 3-way direct-acting solenoid valve
- Port size: PT3/8 (G3/8 optional)
- Thread standard: ISO 228/ISO 6149 compatible
- Fluid compatibility: Air, water, light oils (ISO VG32 or lower)
- Operating pressure: 0.02–1.0 MPa (vacuum to 10 bar)
- Voltage options: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Power consumption: DC: 4.8W max | AC: 5.5VA max
- Response time: ≤15ms (energize), ≤20ms (de-energize)
- Seal material: HNBR (Hydrogenated Nitrile) for enhanced chemical resistance
- Temperature range: -20℃ to 80℃ (with intermittent peaks at 100℃)
- Protection rating: IP67 (dust-tight and protected against temporary immersion)
- Weight: 450g ±5% (with coil)
- Dimensions: 85mm(L) × 40mm(W) × 70mm(H) (excluding fittings)
- Port orientation: Horizontal/vertical flow path with dual mounting options
- Cycle life: ≥10 million cycles (at rated conditions)
High-flow proportional control valve with zero pressure start capability, featuring corrosion-resistant brass body and manual override function. The 2WX03008EI's optimized flow path achieves Cv=0.65 (Kv=0.57) with minimal pressure drop. Compatible with ISO 8573-1:2010 Class 3 compressed air (max 5mg/m³ oil content). Includes surge protection diode and LED status indicator.
- Industrial automation: Pneumatic cylinder control systems
- Water treatment: Chemical dosing valve clusters
- Food processing: CIP (Clean-in-Place) fluid control
- HVAC: Compressor bleed valve operation
- Test benches: Pressure regulation modules
Installation guidelines:
- Maintain minimum 50mm clearance below valve for condensate drainage
- Use copper-free anti-seize compound on threads (max torque 15N·m)
- For horizontal mounting, orient coil vertically upward (±15° tolerance)
- Install 5μm filter upstream (40μm for viscous fluids)
- Lubricated air: ISO VG32 oil mist ≤1ppm
- Water applications: pH 6-8, hardness ≤200ppm CaCO3
| Property | Property Value |
|---|---|
| sku | 2WX03008EI |
| Port Size | PT1/4 |
| Flow Aperture | 1.5mm |
| Coil Voltage | AC24V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.