Airtac 3V100 Solenoid Valve 3V110-06NC-A
The AirTAC Airtac 3V100 Solenoid Valve 3V110-06NC-A is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC220V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the Airtac 3V100 Solenoid Valve 3V110-06NC-A
The 3V110-06NC-A is a 3-port, 2-position solenoid valve: one supply port, one outlet and one exhaust, and two states, so it either feeds the outlet or vents it. The NC in the code means normally closed - with the coil de-energised there is no air at the outlet and the downstream line dumps to exhaust. Energise the coil and the outlet connects to supply; drop power and it vents again. That behaviour is what you want wherever losing electrical power must also release or shut off the air.
This SKU combines a 1/8in port, an AC220V coil and a DIN plug entry, and is a genuine AirTAC part. The rest of the 3V1 family runs to normally open variants, five coil voltages, flying-lead wiring and 3V-F manifold bases. Pressure, flow and coil power are not published on this page - send an RFQ and we will read each value back to you from the datasheet.
Airtac 3V100 Solenoid Valve 3V110-06NC-A Technical Specifications
| Model | Airtac 3V100 Solenoid Valve 3V110-06NC-A |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC220V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V100 Solenoid Valve 3V110-06NC-A
| 3V110 | Body. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC220V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V100 Solenoid Valve 3V110-06NC-A Is Used
Welding fixture clamp
Switches air to a spring-return clamp cylinder on a welding jig; when the coil drops out, the clamp line vents and the spring releases the part.
Blow-off on a filling line
Energise to blow dust or droplets off bottles before capping; de-energise and the nozzle line vents instead of dribbling air.
Pilot signal on a press
Sends a pilot air signal to a larger main valve in a stamping press control stack, so the main valve only receives air while the safety chain is live.
Is the Airtac 3V100 Solenoid Valve 3V110-06NC-A the Right Part?
Choose NC when de-energised must mean no air at the outlet; choose NO when power loss must leave the line supplied - decide this from your fail-safe requirement first. The 1/8in port is the middle size here: a step up from M5 for slightly larger single-acting cylinders, and a step below the 1/4in and 3/8in variants for bigger actuators. The AC220V coil must match your panel supply - a coil is ordered to its voltage, not converted afterwards - and the DIN plug makes coil swap-outs a plug-and-socket job. Because we hold no published flow figures for this family, ask us to verify sizing against your actuator before ordering; if you need documented numbers today, the 3V2 (1/8in, 1/4in) and 3V3 (1/4in) bodies carry published flow and coil-power figures. A double-acting cylinder needs a 5-port valve instead - see the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V100 Solenoid Valve 3V110-06NC-A FAQ
Pressure range, flow, coil power and dimensions for this family are not published on our page. Send an RFQ and we will confirm each figure from the AirTAC datasheet. If you need published numbers immediately, the 3V2 and 3V3 bodies are the AirTAC 3-port valves with documented flow and coil-power figures.
Normally closed (this valve) gives no outlet air while de-energised and vents the line - right for clamps and stops that must release on power loss. Normally open keeps the outlet supplied when power drops, for duties where air must continue. Neither variant drives a double-acting cylinder; that needs a 5-port AirTAC 4V valve.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V100 Solenoid Valve 3V110-06NC-A
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.