AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W)
The AirTAC AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageDC24V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W)
The AirTAC 3V11006NCBT-W is a 3-port, 2-position (3/2) solenoid valve. Three ports - supply, outlet, exhaust - and two states mean it either feeds the outlet or vents it. This one is normally closed: until the DC24V coil is energised, the outlet stays vented and the actuator sees no air. The 1/8in NPT port, marked 06 in the code, suits compact single-acting cylinders, clamps and blow lines.
It is a genuine AirTAC part from the 3V1 family. Across that family both NC and NO states, five coil voltages, DIN and flying-lead entries and 3V-F manifold bases are available. We do not publish pressure or flow figures for this series here; ask, and we will confirm them from the datasheet.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W) Technical Specifications
| Model | AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W) |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | 1/8 in |
| Thread | NPT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W)
| 3V110 | Body. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| NPT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W) Is Used
Jig clamp on a CNC fixture
Switches a spring-return clamp cylinder on a machining jig from a 24V control circuit; the NC state vents the clamp whenever the machine power drops.
Chip blow-off at the machine
An on/off air point that clears chips and coolant from a machined face between cycles, energised only while the cycle runs, so nothing blows when the coil is off.
Pilot signal for a process valve
Sends an air pilot signal to a larger diaphragm valve on a dosing or wash-down skid, keeping the pilot circuit separate from the main panel wiring.
Is the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W) the Right Part?
Choose this code when three things match your machine: a 24V DC control supply (coil voltages are fixed at the factory - you cannot convert by rewiring), an NPT-threaded 1/8in air circuit (PT is the family default; NPT and G are catalogue options), and a normally closed outlet so the actuator vents on power loss. NO versions feed instead; step up to the 1/4in (08) or 3/8in (10) port for larger single-acting actuators, or down to M5 for tiny ones. A 3/2 valve cannot drive a double-acting cylinder - that takes the 5-port AirTAC 4V series. Because we hold no published flow figure for the 3V1 family, let us check sizing against your actuator before you order; if you need a fully documented 3-port valve today, the 3V2 and 3V3 bodies have published flow and coil-power figures.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W) FAQ
Operating pressure range, flow, coil power, response time and protection rating are not published on this page. Send an RFQ and we will read them from the AirTAC datasheet for you. If you need a 3-port valve with published figures today, the 3V2 and 3V3 bodies carry them.
No. A 3/2 valve has one outlet, so it can feed or vent a single-acting (spring-return) actuator but cannot push and pull a double-acting cylinder. Use the AirTAC 4V 5-port series for that.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCBT-W)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.