AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE)
The AirTAC AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC24V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE)
The 3V110-06NCE is a 3-port, 2-position solenoid valve: one supply, one outlet, one exhaust, and two states. In this normally closed version the outlet stays vented until the coil is energised, so a power cut always dumps the downstream air - the behaviour you want wherever released air must be the safe condition. The 1/8in PT port and AC24V coil are the other two choices the code makes for you.
This is a genuine AirTAC part. Across the 3V1 family the same body is offered normally open as well as closed, in AC220V, DC24V, AC110V, AC24V and DC12V, with a DIN plug or flying-lead electrical entry, plus 3V-F manifold bases that carry several valves on one shared supply. If you need pressure range, flow or coil power before ordering, send the code by RFQ and we will read it out of the datasheet for you.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE) Technical Specifications
| Model | AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE) |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE)
| 3V110 | Body. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE) Is Used
Machining fixture clamps
Feeding a small single-acting clamp cylinder on a milling or drilling fixture, and venting it the moment control power drops so the clamp releases safely.
Packaging blow-off
Switching an intermittent air jet that clears dust and trim from a carton or label web between machine cycles.
Piloting a process valve
Sending a pilot signal to open and close a larger air-piloted valve on a bottling or filling rig, driven from a 24V control panel.
Is the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE) the Right Part?
This code fixes three decisions. NC means no outlet air until energised - choose it when a power loss must vent the actuator; the NO variant does the opposite. The 1/8in port suits small single-acting cylinders and blow duties; step up through the family's larger ports for bigger actuators. AC24V must match your panel supply exactly - coils cannot be rewired to another voltage - and this version uses a DIN plug. Because we hold no published flow figures for the 3V1 family, ask us to check sizing against your cylinder before ordering. If you need a 3-port valve with published flow and coil power today, the AirTAC 3V2 (1/8in and 1/4in) and 3V3 (1/4in) bodies carry full datasheet numbers. Double-acting cylinders are out of reach for any 3/2 valve - they need a 5-port valve from the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE) FAQ
This page publishes none, because our datasheet for the 3V1 family is not in hand. Send an RFQ and we will confirm pressure range, flow and coil power from the manufacturer documentation. If you need a 3-port valve whose figures are published today, the AirTAC 3V2 (1/8in and 1/4in) and 3V3 (1/4in) bodies carry them.
No. A 3/2 valve has one outlet, so it can only feed or vent a single chamber - enough for single-acting, spring-return cylinders. A double-acting cylinder needs both chambers pressurised and vented in turn, which is the job of a 5-port valve such as the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCE)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.