AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W)
The AirTAC AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port size1/8 in
- Coil voltageDC24V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W)
The exhaust port is the heart of what this valve does: the 3V11006NOB-W is a normally open 3/2 solenoid valve whose 1/8in PT outlet is fed from supply while the coil is off, and vented to exhaust the moment the DC24V coil energises. Three ports, two states, nothing in between. The DIN plug connection takes a standard plug-in coil connector.
It is a genuine AirTAC product, and it sits inside a family that covers NC alongside NO, five coil voltages, DIN and flying-lead entry, and 3V-F manifold bases. This page carries no performance numbers - pressure, flow and coil power come from the datasheet, which we will supply with your quotation if you ask through the RFQ.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W) Technical Specifications
| Model | AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W) |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally open |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W)
| 3V110 | Body. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W) Is Used
Drilling fixture clamp with power-fail hold
A drilling fixture whose clamp must stay shut through a power cut: the normally open valve keeps feeding the spring-return cylinder until the control energises the coil to vent and open the clamp.
Laboratory test rig purge line
On a laboratory test rig, purge air flows to a sample chamber by default; energising the DC24V coil vents the line so the chamber can be opened safely between runs.
Pilot signal for a large process valve
A large process valve needs a small air signal to shift its actuator; this compact 3/2 feeds or vents that pilot line, with the normally open state holding the pilot supply on at rest.
Is the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W) the Right Part?
Start from the actuator, not the valve. A 1/8in PT port is the usual pick for small single-acting cylinders, compact clamps and blow-off nozzles; if your cylinder bore is larger, the same family steps through 1/4in and 3/8in ports, and down to M5 for tiny loads. State choice comes next: this build is normally open, meaning the outlet has air at rest and vents when the DC24V coil is energised - the opposite logic to NC, where air only appears while powered. The coil voltage is fixed by the part number and cannot be changed by rewiring, so confirm the panel supply before ordering. DIN plug entry suits loom-built panels; flying lead suits hard wiring. For banks of valves, a 3V-F base shares one air supply across all stations. Because we hold no published flow data for the 3V1 series, ask us to match the datasheet to your cylinder before you commit - and if a fully documented 3-port valve is needed now, the AirTAC 3V2 and 3V3 bodies are where those figures live. Double-acting cylinders need a 5-port valve, not this one: see the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W) FAQ
Yes - raise the RFQ and we will return pressure range, flow, coil power and dimensions taken from the AirTAC datasheet, not estimated. Nothing on this page quotes those numbers. Where published figures are needed immediately, the 3V2 and 3V3 3-port bodies in this range are the ones with documentation in hand.
That is a sizing question we answer from the datasheet rather than guess at - send the bore and stroke and we will confirm. What we can say now: this 1/8in PT port is aimed at small single-acting, spring-return actuators, and no 3/2 valve can drive a double-acting cylinder, which takes an AirTAC 4V 5-port valve.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOB-W)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.