AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC)
The AirTAC AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port size1/8 in
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC)
This 3/2 solenoid valve carries an AC110V coil, a common control voltage in many plant and machine panels. Three ports give you supply, outlet and exhaust, and the normally open state means the outlet is connected to supply until the coil is energised, at which point it vents to exhaust.
The 3V11006NOC is a genuine AirTAC part with a 1/8in PT port and a DIN plug connection. Beyond this configuration the family spans normally closed variants, four other coil voltages, flying-lead entry and 3V-F manifold bases for mounting several valves on one shared supply. Pressure and flow figures are not in our hands for this family - ask, and we will confirm them from the datasheet.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC) Technical Specifications
| Model | AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC) |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally open |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC)
| 3V110 | Body. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC) Is Used
Indexing-fixture clamp on a rotary table
The clamp must hold through a control power dip, so the normally open valve keeps the spring-return cylinder fed at rest and the PLC energises the coil to release each index.
Sample chamber vent in laboratory automation
Venting a small handling chamber between test cycles: the chamber stays pressurised at rest, and energising the coil dumps it to exhaust before the next draw.
Web-cleaning air knife on a printing press
A dust-removal jet held on at rest and pulsed off by the controller, sized around a 1/8in port for a narrow air knife.
Is the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC) the Right Part?
Start from the panel: if your control circuit runs 110V AC, this coil matches it directly, and the DIN plug seats into a standard connector on the body for fast replacement. The port decision then follows the actuator - 1/8in PT for compact single-acting cylinders and light blow duties, with M5, 1/4in and 3/8in steps available elsewhere in the family. State is the last choice: NO vents the outlet when energised, NC feeds it when energised, and each returns to its rest condition on power loss. If several 3/2 valves share one air feed on your machine, a 3V-F manifold base tidies the plumbing and gives fault-finding a single supply to check. We hold no published flow figures for the 3V1 family, so ask us to verify sizing against your actuator - or step to the AirTAC 3V2 and 3V3 bodies, whose flow and coil power are published.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC) FAQ
On request we will pull operating pressure, flow and coil power for the 3V11006NOC from the AirTAC datasheet and send them with your RFQ reply. Buyers who need those numbers published on the page itself should look at the AirTAC 3V2 and 3V3 series instead.
Yes - order a 3V-F manifold base instead of individual plumbing. The base is a machined block that carries several valves on one shared air supply and one wiring run, so leaks and electrical faults have fewer joints to trace. Valves are ordered separately from the base.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NOC)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.